-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
Embedding Components, Part 1
The printed circuit has traditionally served as the platform for mounting and interconnecting active and passive components on the outer surfaces. Companies attempting to improve functionality and minimize space are now considering embedding a broad range of these components within the circuit structure. Both uncased active and passive component elements are candidates for embedding but the decision to embed components within the multilayer circuit structure must be made early in the design process.
Some components are easy candidates for integrating into the substrate while others may involve more complex processes and will be difficult to rationalize. Processes have evolved for embedding and interconnecting a range of common passive components: resistor, capacitor and inductor elements. Embedding formed resistor elements, however, is the most mature and economical process to implement. A formed resistor will have two copper lands with resistance material applied between the lands.
The shape of the resistance material can be a simple rectangle, or a shape designed to maximize resistor element length while minimizing area. In each case, the resistance material must overlap the copper lands.
Formed resistor elements may be furnished as a printed thick-film composition or by employing a chemically etched thin-film process.
- Thick-film resistor materials are formulated to furnish a wide range of primary values. The resistor formulations are based on carbon-filled epoxy chemistry that enables screen printing the elements directly onto pre-patterned terminations on a designated circuit board layer followed by curing the product at temperatures in the range of 150°C. This carbon-filled epoxy thick film (TF) chemistry has been successfully used for a broad number of commercial applications. The process is generally employed where tolerances are less critical. Applications are varied and range from simple discrete potentiometers to pull-up and pull-down resistors.
To read the full version of this article which appeared in the June 2017 issue of The PCB Magazine, click here.
More Columns from Designer's Notebook
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2Designers Notebook: What Designers Need to Know About Manufacturing, Part 1
Designer’s Notebook: DFM Principles for Flexible Circuits
Designers Notebook: PCB Designers Guide to Heterogeneous Chiplet Packaging
Designer's Notebook: PCB Design for Bare Board Testing
Designers Notebook: Flexible Circuits for In-line SMT Assembly Processing
Designers Notebook: Ultra High-Density Circuit Board Design
Designers Notebook: Design for Test, Part 3