-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
George Fox University: Teaching PCB Design to EE Students
April 22, 2019 | Nolan Johnson and Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes
We’ve all heard the stories about engineering students entering our industry with no idea how to design PCBs. It’s not their fault; most students aren’t exposed to PCB design in their electrical engineering curriculum. But George Fox University (GFU) is an exception to the rule.
Gary Spivey is director of engineering projects at this Christian college in the Pacific Northwest, and his students learn to design and fabricate a PCB while also giving back to the community. Not surprisingly, these graduates get snapped up quickly. In this wide-ranging interview, Spivey discusses GFU’s engineering curriculum, their cutting-edge lab facilities, and the need to teach students to think critically.
Andy Shaughnessy: What is your background and how did you end up working at George Fox University?
Gary Spivey: I was an EE major at the University of Arizona in '88, and I went to work for the National Security Agency, which I enjoyed very much. While there, I did a three-year stint in Scotland, and upon return, went back to grad school at the University of Maryland at College Park.
I received my master’s and was working on my Ph.D.; I had everything done except for that little essay. Then, I took my family back to Arizona. I got a job in Tucson with a defense contractor and finished my Ph.D. from there. About that time, I thought, "Well, what now?” I was browsing the web one day and stumbled upon GFU, a small Christian school in the Northwest that I didn't know anything about; I wasn’t even looking for a job as a teacher. I noticed that they had an engineering program and were looking for someone, and upon a more detailed look, realized that they were looking for me. My major and minor and the company I was working for were the top three things they wanted. I let it sit for a year, and the position was still open. So, we decided to come up here and help start this engineering program. That was in 2003 when we had our first group of seniors. It had been a three-year program before that.
There were four engineering faculty at that point, including myself, and then the program got accredited with about 40–50 students; now, there are over 300 students and approximately 15 faculty. We began with concentrations in mechanical and electrical engineering, and now we also have computer, civil, and biomedical concentrations.
Nolan Johnson: Can you tell us more about your engineering program?
Spivey: Students are initiated into the program through our engineering principles courses. There is a two-semester sequence in the first year where students have a significant amount of hands-on education. In the fall, they are trained in machine shop equipment and solid modeling, and use these skills to design and manufacture a small air engine. In the spring, they learn basic electronics and programming, and use those skills to create and build an Arduino-controlled solution for a constrained theme (e.g., a new kitchen appliance or something to improve the dorm room). The theme changes each year.
Sophomore year is fairly standard and rigorous as students learn the fundamental skills in their concentration. In their junior year, students participate in our Servant Engineering Program. The program began in 2010 and allows every junior to participate in a service learning engineering project.
To read this entire interview, which appeared in the March 2019 issue of Design007 Magazine, click here.
To learn more about George Fox University's Engineering program click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.