-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Traversing the Design Landscape With Hartley and Creeden
December 11, 2019 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Design instructors Rick Hartley and Mike Creeden recently spoke with the I-Connect007 Editorial Team about the current landscape of the PCB design segment. This wide-ranging conversation also focused on the next generation of designers, some promising new laminates, and the need for more communication and collaboration between designers and fabricators.
Andy Shaughnessy: Where do you see things right now as far as technology, software, and design?
Rick Hartley: The first thought that comes to mind is that things continue to reach higher speeds. Lee Ritchey does a class now about how to design up to 32 gigabits, which is almost the norm. Five to 10 years ago, people were concerned about having to do 2–6-gigabit designs, and there was a lot of chattering of teeth and wrenching of hands from people who were heading that direction. Now, people do that routinely, which also drives additional interference and EMI problems; I see this on a constant basis. I’ve had companies contact me recently, saying, “We have noise problems, and we have no idea how to solve them. Will you work with us on this?” I also read an interview recently with Dan Beeker, who said, “It has reached the point in the automotive world where people design PCBs and expect to fail EMI testing.”
Barry Matties: Why do you think they expect it to fail?
Hartley: They don’t know how to design circuit boards and haven’t figured out how to yet. There was a time when even though things were fast, they weren’t so blazingly fast that if you were doing a smaller board, you were lucky enough that the lines on the board weren’t distributed, the power distribution wasn’t so critical, etc.; sometimes they would fail, but sometimes they would pass. Too many people don’t know how to design to prevent things from failing, especially in the automotive world. For example, high-end airbag electronics have high layer-count boards. But for a lot of the microcontroller circuits and low-end things that go into cars, we expect to have low layer-count boards.
To read this entire interview, which appeared in the October 2019 issue of Design007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.