-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Art and Science of DFM
December 9, 2021 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Our industry has been focusing on DFM for decades, but in our reader surveys, DFM issues are always among the biggest challenges cited by respondents. I recently spoke with Vince Mazur, product and persona marketing engineer at Altium, about the art and science of PCB design, and particularly design for manufacturing. Is DFM an art form in itself?
Andy Shaughnessy: We often hear that PCB design is part art, part science, a matter of right brain and left brain. Do you think it’s more of one than the other, or does it depend on the design job?
Vince Mazur: I think it depends on the design job. For example, for impedance-controlled, high-speed PCB design, the priority is performance-to-spec, not the expression or application of creative skill and imagination, which is a common definition of art. The designer must choose the right materials and define the “right” stackup. By that, I mean the materials and geometry that science tells us will realize the desired impedances. If the designer chooses an incorrect stackup, it doesn’t matter how pleasant the PCB looks, how optimized the placement and routing is, or how much expression or creative skill and imagination was deployed—it will not function as intended. The idea that science is the driver in this case is not to say that art is not present. Art most certainly is present in the all-important placement of components and routing of traces. Rather, I mean that the scientific aspect takes precedence. Art will always be present.
On the other hand, the design specifications may lend themselves to or even require more expression and creativity, especially when the design is closer to the user experience. Consider a display or series of visual indicators that may fit along a contour of a curved mechanical enclosure and implemented with a flex circuit. These types of designs are art first, science second. But I maintain, once again, that both art and science will be present. In this example, one would pay attention to bend radii and other mechanical and materials science to assure long term quality of the flex implementation.
Shaughnessy: Can someone with a great mind for science learn the artistic side of design? We hear non-degreed designers say this about EEs—that they’re too focused on the science and not enough on the art.
Mazur: Yes, I think this is possible provided the designer desires to learn more of the artistic side. Pablo Picasso’s father was a professor at a school of fine arts. Education is widely available in art, which implies that it is something that can be taught and learned. However, I believe there is a limit to what a scientifically focused person can do in art. While anything is possible, one can pursue fluency in art, but they likely would have a difficult time becoming a Picasso or a Rodin. Just as either of these artists could likely learn more about science, they likely would not become an Einstein or a Tesla. But then there are those outliers that have extreme talent in both domains, such as Galileo. So yes, it is possible for someone with a great mind for science to learn the artistic side of design.
To read this entire conversation, which appeared in the December 2021 issue of Design007 Magazine, click here.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.