-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Beyond Design: The Rise of the Independent Engineer
August 17, 2016 | Barry Olney, In-Circuit Design Pty LtdEstimated reading time: 2 minutes
With the changing demographics, the old-timers in our industry—the master PCB designers—are about to retire and hand over the exacting job of PCB design to the Gen-X and Ys. These generations, shaped by technology, will tackle the most demanding designs without possessing the experience that we veterans benefit from.
And to top it off, these up-and-coming designers will be degreed engineers who have to cope with both design and layout tasks as the specialized PCB designer’s positions are phased out. Apart from a demanding regime of training, what can these guys do to become successful independent engineers?
The majority of veteran PCB designers began their careers on a drafting table. In the late 1970s, basic PCB design software began to emerge in the mainstream market. The computer skills of the PCB designer grew and before you knew it, we were all proficient with the latest EDA software tools. Some argue that since the emergence of EDA, the line between layout and engineering has become blurred. Engineers who are proficient with EDA software can produce a complex PCB, eliminating the need for a PCB designer. Similarly, a PCB designer can perform engineering design with the use of sophisticated analysis software. In theory, this is a good concept but from the engineer’s perspective, it runs into practical problems:
- Engineers must undergo significant training in order to use the software. In many cases, this is simply not feasible and the lost opportunity costs are prohibitive.
- In order to remain proficient, the engineer must regularly use the software. This is a problem for busy engineers who have a variety of responsibilities and only work on one or two projects per annum.
- The engineer must have a thorough understanding of the specific requirements of the design rules encompassing PCB fabrication and assembly in order to produce a reliable, manufacturable product.
The net result is that the engineer typically does not use the software but rather relies on the PCB designer’s application and manufacturing knowledge to guide him through the process. Also, in most cases, the PCB designer struggles to use the analysis software and requires extensive and ongoing training. So, the next innovation in EDA tools must not only be fast to adopt and easy-to-use, but still be packed with all the features today’s designers need for the most complex boards.
To read this entire article, which appeared in the July 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.