-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePartial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
Silicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Rehm Introduces Seamless Traceability of Machine Data
March 20, 2020 | Rehm Thermal SystemsEstimated reading time: 3 minutes
Hermes networking is now possible with Rehm systems—no data loss at the outlet due to Separo separation module.
In Greek mythology, the messenger of the gods, Hermes, carries the messages of the gods to mortals. With his quick and clever way he moves freely between the two worlds. No wonder that his name was chosen for a new interface communication: "The Hermes Standard". It ensures that important assembly information is transmitted reliably, spontaneously, easily and completely from machine to machine and to higher-level systems—regardless of the machine's manufacturer. The convection soldering systems VisionXP+ and VisionXP+ Vac from Rehm Thermal Systems are also available with "The Hermes Standard" and the Separo separation module.
Efficiency and networking are the keywords that characterize today's industry. For the future of industrial production it is essential that the entire production is networked and that the necessary process and assembly data can be accessed at any time. Especially for SMT lines, which consist of systems from different manufacturers, it is important that the networking is also guaranteed manufacturer-independently across the entire line. With "The Hermes Standard" this is possible without any problems.
"The Hermes Standard:" Horizontal M2M communication
The Hermes Standard directly links the individual machines through horizontal communication. Data is exchanged directly from machine to machine (M2M) on the entire SMT line, the data packets travel through the machine with the printed circuit boards: at the start of the production line there is a scanner that uniquely identifies the PCB. The machine uses this information to create the Hermes data package, which is passed on from machine to machine. However, this is not done via digital signals, but via a network. This new type of interface communication is based on a TCP/IP and XML protocol using standardised cables and data formats. This simplifies the integration process and reduces costs. In addition to the module's barcode, various data is also stored and communicated.
With or without scanner at the outlet
Customers of Rehm Thermal Systems can choose between two variants if they want a Hermes interface communication for VisionXP+ or VisionXP+ Vac: Either with a scanner on the outfeed conveyor, or without. Without a scanner at the outfeed conveyor it is not possible to manually reinsert a board (Reinsert). This reduces the risk of losing data or assigning wrong boards. If there is a scanner on the outfeed conveyor, the boards can be removed after the soldering process and re-inserted as required. This is particularly necessary if a manual visual inspection is to be carried out or samples are to be taken for quality assurance processes. An assignment of the data to the correct board remains, however.
Separation of the boards by Separo
Regardless of whether or not there is a scanner at the outfeed conveyor, the convection soldering systems VisionXP+ and VisionXP+ Vac are available with the Separo separation module. This is part of the machine and therefore fully integrated. If, for example, there is a jam of the assemblies in the cooling zones, the Separo separates the assemblies again at the outfeed to ensure correct and complete data transfer and to prevent loss of data.
The vision systems from Rehm are also ready for CFX. With the CFX interface (IPC-CFX), communication is network-based vertical. While the Hermes standard is mainly used for M2M communication, the CFX is used for data upload and download as well as data analysis. The combination of horizontal Hermes communication and vertical CFX communication is absolutely essential for the Smart Factory in the long term and represents a further step towards standardisation.
About Rehm Thermal Systems
As a specialist in the field of thermal system solutions for the electronics and photovoltaic industry, Rehm is one of the technology and innovation leaders in the modern and economical production of electronic assemblies. As a globally active manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, function test systems, equipment for the metallization of solar cells as well as numerous customer-specific special systems, we are represented in all relevant growth markets and, as a partner with 30 years of experience in the industry, we realize innovative manufacturing solutions that meet standard requirements.
Suggested Items
Fall 2024 Issue of IPC Community Now Available
10/14/2024 | IPC Community Editorial TeamThere’s so much happening at IPC, so be sure to open the latest issue of IPC Community, brimming with must-read features on members of the electronics industry who are making a difference in their own unique way. Just for starters, our member profiles feature Virginia-based Weidmuller, a heart-warming story from E-Tron, and you’ll discover how the owners of Out of the Box Manufacturing are successfully tackling workforce talent challenges.
Discover TRI's Solutions at Manufacturing Indonesia 2024
10/14/2024 | TRIPT Hibex Indonesia, the distributor of Test Research, Inc. (TRI), will take part in Indonesia's Leading Manufacturing, Machinery, Equipment, Materials, and Services Event, Manufacturing Indonesia 2024.
Nortech Systems Announces Expansion of PCBA Capabilities with IPC-J-STD-001 Space Addendum
10/08/2024 | BUSINESS WIRENortech Systems Incorporated (“Nortech Systems”, or the “Company), a leading provider of engineering and manufacturing solutions for the aerospace and defense industry, has announced the Company has certified trainers and operators to build printed circuit board assemblies (PCBAs) to the IPC-J-STD-001 Space Addendum standard.
IPC Recommends Greater Focus on Electronics Needed for US-based AI Data Centers
10/07/2024 | IPCA new white paper from IPC, “AI-based Data Centers for the United States: Technologies, Supply Chains, and Resiliency Gaps,” explores the actions needed to improve the supply chain resiliency of U.S.-based artificial intelligence (AI) data centers and the electronics used in them.
IPC CEMAC 2024: Shaping Innovation and Driving Technological Transformation in Electronics Manufacturing
10/03/2024 | IPCIPC CEMAC(China Electronics Manufacturing Annual Conference, as an exclusive annual event for members in the electronics manufacturing industry, aims to promote industry development and cooperation, facilitate the application and promotion of quality and technical standards in China's electronics manufacturing, and establish an efficient, professional, and high-value international exchange platform centered around IPC international industry standards.