-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
3D Electromagnetic Analysis
August 22, 2023 | Yuriy Shlepnev, SimberianEstimated reading time: 1 minute
Data rates in PCB interconnects are increasing in all signaling protocols (PCIe, DDR, GDDR, Ethernet, USB, SAS, InfiniBand, CEI, OIF, 5G). Most of those high-speed signaling standards have one-lane data rates over 6 Gbps (GT/s) and some up to 112 Gbps with signal spectrum in microwave and even millimeter wave bandwidths. Design of compliant interconnects at these data rates cannot simply rely on geometrical rules or rules of thumb. Signal distortion by reflections, dissipation and crosstalk can cause interconnect performance degradation or even failure. To avoid it, signal integrity compliance analysis and possible interconnect optimization is required.
Our software provides 3D electromagnetic analysis of PCB and packaging interconnects. It can be used for pre-layout design (stackup exploration, via hole design) and post-layout interconnect compliance analysis and optimization. Simbeor ensures the accuracy of the models by using advanced algorithms for 3D full wave analysis, benchmarking, and experimental validation. Simbeor and the “sink or swim” interconnect design process remove all uncertainties and guarantee the first pass design success. Most importantly, it lets you solve electromagnetic signal integrity problems at a relatively low cost and with extreme ease. You don't need to be an expert in signal integrity or have a PhD in electromagnetics to use it.
The first version was introduced in 2007. It was the first electromagnetic tool designed specifically for PCB designers and signal integrity engineers. Since then, its evolution is a chain of innovations in interconnect analysis and validation. In the past three years, with the major part of the work completed in "self-isolation," our team has elevated the tool to a new level.
Our software development kit was introduced for design exploration, machine learning, and for possible integration into other tools. Post-layout geometry processing, visualization and model building were accelerated orders of magnitude. Electromagnetic analysis was also accelerated orders of magnitude with the domain decomposition technique. We had enough time—there were very few distractions—and sufficient expertise to re-think and re-design the post-layout process, making it suitable not only for SI engineers, but for any PCB designer.
To read this entire article, which appeared in the August 2023 issue of Design007 Magazine, click here.
Suggested Items
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/07/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.