Connect the Dots: Designing for Reality—Surface Finish
Fresh PCB Concepts: Tariffs and the Importance of a Diverse Supply Chain
Elementary Mr. Watson: The Road Ahead—Advances in PCB Design Technology
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... High Performance Materials, Chapter 4
January 2, 2025 | I-Connect007Estimated reading time: 1 minute
The Printed Circuit Designer’s Guide to... High Performance Materials
by Michael Gay, Isola
Chapter 4: Copper Foil
Copper foil is the standard conductive layer used for metal-clad laminates, although other options are available. There are two main types of copper foil used for PCB boards today: electrodeposited (ED) foil and rolled annealed (RA) foil. ED copper foil is produced by a continuous process which yields a well-controlled product in mass volume and low cost as compared to RA copper foil. ED copper foil has a wide range of thicknesses, from 5–400 μm, for PCB applications. IC substrate application requires an ultra-thin foil which is supplied on an 18–72 μm copper carrier and range in thicknesses from 1.5–5 μm.
Rolled annealed foil yields a very smooth surface where the process deforms the copper crystalline structure to achieve thickness. Unfortunately, the foil is only available in a 25" wide format. Most processes are designed around a 50" wide machine direction of the glass using large hydraulic presses with platen sizes to accommodate the 50" glass width. Use of the RA foil reduces productivity and results in higher cost. With the development of newer smooth ED foils that are as smooth as RA foil, the need for RA foil and the associated cost has been largely mitigated.
Visit the I-Connect007 library to continue reading The Printed Circuit Designer’s Guide to... High Performance Materials.
Share on:
Suggested Items
DesignCon 2025, Day 2: It’s All About AI
01/30/2025 | Marcy LaRont, I-Connect007It’s hard to get away from the topic of artificial intelligence, but why would you? It’s everywhere and in everything, and my time attending presentations about AI at DesignCon 2025 was well worth it. The conference’s agenda featured engaging presentations and discussions focused on the technological advancements in AI, big data centers, and memory innovations, emphasizing the critical relationship between processors and circuit boards.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
Indium Announces InnoJoin as Exclusive Global Sales Partner for NanoFoil®
11/04/2024 | Indium CorporationIndium Corporation announced that InnoJoin GmbH will be the exclusive global sales partner for NanoFoil® in component mounting applications. NanoFoil® is a leading nanotechnology material that delivers energy in a controlled and precise manner for joining, energetics, and heating applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
Australia Opens New Li-S Battery Plant, Grants $AUD1.7M for Industry Growth
08/12/2024 | BUSINESS WIREAustralian battery technology company Li-S Energy (ASX:LIS) has officially launched its new 2MWh lithium sulfur and lithium metal battery production facility at Geelong, Victoria, Australia. Li-S Energy will also start producing lithium foils and laminates at the facility after receiving a government grant.