-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
U.S. Tariffs to Curb Investment and Consumption Momentum; 2025 Global End-Market Outlook Downgraded
April 8, 2025 | TrendForceEstimated reading time: 2 minutes
On April 2nd, the U.S. announced a new round of reciprocal tariffs, followed by a provision allowing exemption for goods with more than 20% “U.S. value”. TrendForce’s latest observations reveal that the lack of macroeconomic improvement since 2024, coupled with the inflationary and recessionary risks posed by these new tariffs, has prompted a downward revision of the 2025 shipment outlook for several end-device markets—including AI servers, servers, smartphones, and notebooks.
Stronger-than-expected shipments of servers, smartphones, and notebooks in 1Q25 were largely driven by brands advancing shipments to the U.S. ahead of the new tariff implementation. TrendForce notes that supply chain players are still evaluating how to absorb increased production costs. Whether U.S. value will be assessed based on brand nationality or manufacturing origin remains a key point of concern for the industry.
TrendForce presents two revised forecast scenarios: In the base case, the 20% U.S. value is interpreted as brand-based—meaning American brands are more likely to secure exemptions for complete systems or finished products. In the worst case, retaliatory tariffs from other countries escalate the trade war, and the U.S. value is defined strictly based on the manufacturing location, which significantly increases the risk of market contraction.
In the AI server segment, the base case assumes partial tariff relief through the U.S. value exemption, while Mexico—being excluded from the tariff list—remains a strategic re-export hub for ODMs serving U.S. clients under the USMCA agreement. However, ongoing political and economic uncertainty may cause OEMs and CSPs to adopt a more cautious procurement approach. Consequently, TrendForce has slightly lowered its 2025 AI server shipment growth forecast to 24.5% YoY.
Under the worst case, escalating tariffs could trigger global inflation and erode consumer spending power. This would likely lead CSPs and OEMs to further delay investments in AI servers, reducing the annual shipment growth rate to around 18%.
For the server segment, pressures from U.S. tariffs are expected to constrain corporate CapEx, leading to more conservative IT budgets in the second half of 2025. Full-year server shipment growth forecast is thus trimmed to 5.4%. In the worst case, the global supply chain would face higher costs and investment hesitancy if tariffs expand to include semiconductors and core computing components, driving server shipment growth down to 2%.
TrendForce also notes that a more lenient interpretation of the 20% U.S. value rule would allow mid- to high-end smartphones to qualify for exemptions, whereas low-end or entry-level models may still be impacted. Amid widespread consumer uncertainty, value-for-money purchases will become more prominent. In the base case, 2025 global smartphone production is projected to be flat YoY. In the worst case, production may decline by 5% YoY.
PC OEMs began pulling forward shipments to the U.S. as early as 4Q24 in preparation for potential tariffs. After the announcement on April 2nd, U.S. brands with established assembly operations in Southeast Asia continued shipping as planned, while non-U.S. brands adopted a wait-and-see approach. With macroeconomic uncertainty expected to suppress both consumer and commercial upgrade demand, TrendForce now forecasts 2025 global notebook ODM shipment growth to slow to 3% under the base case and to 2% in the worst case.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Indium Corporation Introduces New Flip-Chip Flux for Semiconductor Devices
07/31/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier, today announced the global availability of WS-910 Flip-Chip Flux, a new water-soluble flip-chip dipping flux designed to meet the demands of cutting-edge semiconductor devices.
FlashPCB Enhances SMT Production Line with Heller 1809 Reflow Oven and KIC ProBot
07/31/2025 | FlashPCBFlashPCB, a leading provider of quick-turn PCB assembly, has expanded its surface mount production capabilities with the installation of a Heller 1809 MKII reflow oven paired with the KIC ProBot automatic profiling system. This addition supports FlashPCB’s goal of achieving faster throughput, higher quality assurance, and consistent process control across a wide range of PCB builds.
KOKI to Showcase Analytical Services and New HF1200 Solder Paste at SMTA Guadalajara 2025
07/31/2025 | KOKIKOKI, a global leader in advanced soldering materials and process optimization services, will exhibit at the SMTA Guadalajara Expo & Tech Forum, taking place September 17 & 18, 2025 at Expo Guadalajara, Salón Jalisco Halls D & E in Guadalajara, Mexico.
Federal Electronics Mexico Boosts Speed and Flexibility with New Mycronic A40DX Pick-and-Place
07/23/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has announced a major upgrade at its Hermosillo, Mexico facility with the installation of a Mycronic MYPro A40DX Pick-and-Place system, advancing its surface mount assembly capabilities for high-reliability electronics manufacturing.
DuPont Publishes 2025 Sustainability Report
07/22/2025 | PRNewswireDuPont published its 2025 Sustainability Report detailing the progress made toward achieving its 2030 Sustainability Goals.