-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSoldering Technologies
Soldering is the heartbeat of assembly, and new developments are taking place to match the rest of the innovation in electronics. There are tried-and-true technologies for soldering. But new challenges in packaging, materials, and sustainability may be putting this key step in flux.
The Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
Estimated reading time: Less than a minute
Another Look at AOI
PCB inspection is taking on greater significance as boards and packaging become increasingly smaller, with greater functionality. Automated optical inspection (AOI) and its backup associate, X-ray, team up to catch a variety of board assembly problems. But it’s AOI that’s at the forefront of this process.
AOI takes on a variety of key assignments, such as checking out the numbers labeled on passive and active devices and matching them with the database to assure they’re legitimate components, as specified in the bill of materials (BOM). Also, if alternate parts are used, the AOI machine is trained to verify them, regardless of manufacturer, as long as the device has the same footprint, value, tolerance, voltage, package type, etc.
That’s only the beginning. AOI is excellent at detecting missing or wrong components and misalignments. If a component is misaligned, say at 30° or 45°, AOI catches it. It also catches opens and bridging, and it can check for skewed parts and tombstoning. AOI can detect anything as long as it’s written on the component.
Read the full column here.
Editor's Note: This column originally appeared in the October 2013 issue of SMT Magazine.
More Columns from Zulki's PCB Nuggets
Zulki's PCB Nuggets: Cleanliness is Next to ReliabilityZulki’s PCB Nuggets: Thermal Compression Bonding for Extra Fine Pitch Flip Chips
Zulki’s PCB Nuggets: WBAN Steps Into PCB Microelectronics Assembly
Zulki’s PCB Nuggets: Photonics Comes to PCB Microelectronics Assembly
Zulki’s PCB Nuggets: Sub-Micron Die Bonding—Don’t Be Misled by Five Micron Placement Standard
Zulki’s PCB Nuggets: Meet the New Player in PCB Microelectronics Assembly—Interposers
Zulki’s PCB Nuggets: How Effective Is Your PCB Microelectronics Assembly?
Zulki’s PCB Nuggets: Five Key Benefits for Onshoring PCB Microelectronics Assembly