-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAll About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC-A-610: What's New With Rev F?
July 22, 2015 | Leo Lambert, EPTACEstimated reading time: 2 minutes

IPC generates many specifications related to printed circuit board fabrication, assembly processes and inspection criteria. The intent of the following article is to describe how the documents come about and how they are generated by providing an overview of the latest changes in IPC-A-610, Acceptability of Electronic Assemblies, hereafter identified as 610. Additionally, there are online courses available that will go through each one of these changes in details.
Background
Why are new revisions created? Can’t IPC just issue updates to the existing revision? Who defines what the changes are going to be and who approves of those changes? Why can’t they make changes for all the new technologies available? And the best question of all: Why does my product have some conditions that are not covered in the documents and specifications?
Taking just one document, 610, and trying to answer those questions will hopefully provide a window for customers, users, and manufacturers to see where these documents come from and how they are put together to upgrade the products being made, and hopefully improve the quality of those products.
Every five years, a new revision is created for all the specifications from IPC. This was mandated for all ANSI approved documents. Since many IPC documents were ANSI-approved, they had to be reviewed and updated on a regular basis, in our case five years. There are multitudes of implications with the release of new revisions. They include, but are not limited to: contract negotiations, purchasing of new specifications, and development of new certification training programs to cover the requirements of those documents for the trainers and the specialist. This is all accomplished by attending the semiannual meetings of IPC and participating in the task group meetings, where all the new information is presented, all the comments are reviewed to correct deficiencies in the existing revision, and all conflicting information is reviewed to verify that complementary documents are in agreement for criteria information.
Once all the information is reviewed and accepted by the committee, a draft is sent to the IPC community for review and comment. Once again there is a review and discussion on the comments, and subsequently another draft is created and the process repeats itself until all the comments are resolved and a new document is published.
Creating updates to the documents is also handled in the same fashion, and since the comments are considered critical, the review period is shorten to enhance the speed to which the approval cycle is made and then the documents are published for the user community. This is a relatively short process as it only addresses critical issues to the main body of the document.
So, what defines the changes? First, comments from the user community as found on the comment sheet in the back of every IPC specification. Second, submittal from the component manufacturers on new components being introduced for new technology applications. Finally, corrections needed from editorial and technical mishaps in the existing documents.
To read this entire article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.