Elementary, Mr. Watson: High Power: When Physics Becomes Real
The Shaughnessy Report: Watt About Power Integrity?
Global PCB Connections: Understanding Your Fabricator’s Capabilities (or Niche)
Selecting a Reflow Oven, Part 1
August 10, 2015 | Robert Voigt, DDM NovastarEstimated reading time: 1 minute
A reflow oven is simply any device that can liquefy solder in a controlled way to produce an electrical conductive bond between the component and its host (the board). There are several different methods to do this, not all of which can literally be called ovens. For instance, the simplest form of heating is performed by conduction, that is, by contact with a heated surface such as a hot plate. Other heating methods typically performed within a chamber (oven) but that rely on different heating methods include:
- Convection: Boards with their assembled components are passed through heated, circulating air from a conventional electrical heat source.
- Infrared (IR): Boards are passed inside a chamber over a direct IR heat source.
- Vapor Phase: Vapor is generated by heating a fluid with a specific boiling point (240°C) and transfers heat to the circuit board just above the melting point of the solder.
Let's begin with a commonly asked question: What size oven do I need? The answer is also a question: How many zones can you afford?
It seems like an odd way to start a discussion about reflow ovens, but it's not entirely unreasonable. As with any complex process, there will be tradeoffs between cost and capabilities, and more zones will always give you better flexibility and more control over your profile—but at a cost. The decision has to be qualified primarily on your anticipated throughput; that is, how many boards you process in a day or a week.
There are other considerations too, such as board size, component density, and appropriate thermal technology, but we’ll talk about those (and more) after identifying the work-flow volume.
A typical soldering operation in today's world requires three main stages for temperature profiling: preheat, soak (activate), and reflow, which perform these functions: 1) The preheat stage for a certain period of time to activation temperature; 2) the soak stage for a different period of time to activate the solder; and 3) the reflow stage where temperatures peak for yet a different time frame. After this, the board is typically cooled and removed. Depending on the material, e.g., leaded, lead-free or specialty materials such as epoxies, the heating profile for each stage will vary according to the manufacturer’s specifications to achieve optimal bonding.
Editor's Note: This article originally appeared in the August 2015 issue of SMT Magazine.
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.
Amplifying Innovation: New Podcast Series Spotlights Electronics Industry Leaders
10/08/2025 | I-Connect007In the debut episode, “Building Reliability: KOKI’s Approach to Solder Joint Challenges,” host Marcy LaRont speaks with Shantanu Joshi, Head of Customer Solutions and Operational Excellence at KOKI Solder America. They explore how advanced materials, such as crack-free fluxes and zero-flux-residue solder pastes, are addressing issues like voiding, heat dissipation, and solder joint reliability in demanding applications, where failure can result in costly repairs or even catastrophic loss.