-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueMechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
Creating a Culture of Collaboration
PCB designers could learn quite a bit from NASA and the private companies that develop spacecraft: Every one of these vehicles is a testament to the value of collaboration among disparate stakeholders. Without a collaborative culture, the rocket might never get off the ground.
Breaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Calumet is Bullish on Additive and Semi-Additive
March 15, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
![](https://iconnect007.com/application/files/9216/9086/7438/Todd_brassard_1.jpg)
Calumet Electronics has been a domestic pioneer with additive and semi-additive electronics manufacturing processes. We recently asked Calumet’s Todd Brassard and Meredith LaBeau to discuss the state of this technology, which traditional processes that they might replace, and some of the challenges facing OEMs or PCB shops that are considering these options.
Barry Matties: We’re seeing more additive and semi-additive. Let’s start with what these technologies represent to Calumet.
Todd Brassard: I’m sure some of your readers will go a little crazy at our use of the word “additive.” In my mind, pure “additive” manufacturing is 3D-printed or deposition-based processes while “semi-additive,” in the context of circuit board substrates, involves a seed layer of copper (A-SAP™) or a very thin layer of copper foil (mSAP) with plated copper traces and features.
We understand the distinctions between terms additive and semi-additive; we do not use “additive” to necessarily describe a process, but rather as a proper noun to name the thing and contrast it against “subtractive” processes. For example, when working with Averatek’s A-SAP™ technology, the seed layer is so thin that it is removed with a simple micro-etch. To me, the process is so close to being purely additive, I name it an additive process.
Matties: Is it going to be a mandatory offering for most fabricators in the coming years? Or is this something that will still be limited in scope?
Meredith LaBeau: What is driving the need for additive manufacturing—and I use this term “additive” as Todd just described—is design size and complexity. Next generation electronics will be much smaller. This is easy to see just following the mobile device industry. An electronic interconnect manufacturer in the U.S. can only go so small with traditional subtractive manufacturing processes.
Another piece of this push toward additive technology is environmental. There will be many more conversations about the environmental impact of manufacturing processes, and these considerations will factor more heavily into contract awards. With traditional subtractive processes you’re removing copper, but with additive processes you’re mostly adding copper. I believe there's going to be a shift in design to reduce waste streams regardless of technology, as part of the wider ESG movement.
Todd Brassard: Yes, ESG: environmental and social governance.
Matties: Is that becoming more prevalent?
LaBeau: We are just starting to see environmental considerations seep into conversations and design considerations at our level.
Todd Brassard: We are seeing more environmental considerations flowing down from the DoD. The DoD wants to see transition to greener solutions. Calumet is learning the ropes of federal funding and we believe environmental considerations must be included in any submitted proposal. We’ve been seeing these types of requirements added to RFPs in the last few years. Personally, I believe this is a good thing. We should be paying attention to what we are doing to the planet; this is just common sense.
LaBeau: The additive and semi-additive movements are not just about miniaturization, but also system performance and integrity. Additive and semi-additive technologies provide for better copper trace and feature formation which improves signal integrity and shortens transmission lines, allowing faster bit rates and higher frequencies. For example, radar and communications systems achieve higher performance when trace walls are square and smooth. Combine the potential for feature formation with advanced materials and chemical processes and a wide array of possibilities emerge. As an example, Calumet can plate copper on transparent substrates; just imagine the applications, for example, in the augmented reality space.
To read this entire conversation, which appeared in the February 2022 issue of PCB007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Beyond Prepreg: The Glassless ‘Revolution’
06/25/2024 | Marcy LaRont, PCB007 MagazineAs our industry rallies around the call to action for HDI and UHDI, we find unparalleled and myriad laminate options. This abundance is rivaled only by the question surrounding them: Can they measure up to the high technology packaging demands required in our near future? Unsurprisingly, recent developments in FR-4-esque materials for high-speed and high-density designs, as well as newer, glassless technology for replacing traditional glass-impregnated laminates and prepreg, are garnering much interest. I caught up with Alun Morgan, technology ambassador for Ventec International Group, to ask about the impending “glassless revolution” and how it’s poised to solve some of our manufacturing challenges.
Connect the Dots: Designing for Reality—Lamination and Materials
06/19/2024 | Matt Stevenson -- Column: Connect the DotsAs many of you have likely figured out, I am quite passionate about the subject of designing PCBs for the reality of manufacturing. I wrote a book about it and I participate in an I-Connect007 On the Line with… podcast series dedicated to the subject. This companion article will focus on multilayer lamination, keeping the bigger picture in mind: Realistic PCB designs should prioritize manufacturability and reliability of the PCB as well as meet the other design requirements. So, one must account for the production variables associated with individual manufacturing partners.
Day 2: A Full Day at the EIPC Summer Conference
06/19/2024 | Pete Starkey, I-Connect007Editor's note: This is the third and final report from the EIPC Summer Conference. It was a bright and early start to the second day of the 2024 EIPC Summer Conference at the European Space Centre, Noordwijk, The Netherlands, June 4-5. A short journey by bus from the hotel in Leiden and our security passes from the day before got us through the gate and to our seats in the Newton Room for Session 4, “Material Studies,” moderated by Martyn Gaudion.
Looking Into Space: EIPC Summer Conference, Part 2
06/17/2024 | Pete Starkey, I-Connect007“Innovative Development of PCB Technology and Design” was the theme of the second session of the 2024 EIPC Summer Conference, June 4-5, at the European Space Centre, Noordwijk, The Netherlands.