Elementary, Mr. Watson: Heat—The Hidden Villain of Power Electronics
Beyond Design: The Fundamental Structure of Spectral Integrity
The Shaughnessy Report: Watt About Power Integrity?
DFM 101: Solder Mask and Legend
April 28, 2022 | Anaya Vardya, American Standard CircuitsEstimated reading time: 1 minute
Introduction
One of the biggest challenges facing PCB designers is understanding the cost drivers in the PCB manufacturing process. This article is the latest in a series that will discuss these cost drivers from the PCB manufacturer’s perspective, and the design decisions that will impact product reliability.
Solder Mask Availability
Most shops provide a variety of solder masks to satisfy the needs of all customers. Table 1 is a description of typical solder masks currently available. The need for closer tolerances has driven the implementation of laser direct imaging (LDI) solder masks (laser-defined solder mask pattern instead of screening).
- Solder mask is a protective coating that shields selected areas of a PCB from oxidation, handling and unwanted solder during assembly.
- Solder mask allows a 0.003" web to be placed between pads in an SMD array, provided the minimum spacing between these pads is 0.007” (by design).
- Green solder mask allows a 0.003” web to be placed between pads in an SMD array, provided the minimum spacing between these pads is 0.007” (by design). All colors cannot maintain this dam size.
- To assure no solder mask on any pad in an SMD array, the minimum solder mask clearance for a surface mount pad is 0.002” per side (not applicable for panel sizes over 18”x24”). As space permits, a clearance of 0.0025” per side is preferred.
- Allow 0.030” per-side solder mask clearance for score lines.
- To prevent solder mask from going into and/or plugging a hole, solder mask clearance should be 0.010” (0.005” per side) larger than the pad size on both sides of the board.
To read this entire article, which appeared in the April 2022 issue of Design007 Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
BTU International Earns 2025 Step-by-Step Excellence Award for Its Aqua Scrub™ Flux Management System
10/29/2025 | BTU International, Inc.BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, has been recognized with a 2025 Step-by-Step Excellence Award (SbSEA) for its Aqua Scrub™ Flux Management Technology, featured on the company’s Pyramax™ and Aurora™ reflow ovens.
On the Line With… Ultra HDI Podcast—Episode 7: “Solder Mask: Beyond the Traces,” Now Available
10/29/2025 | I-Connect007I-Connect007 is excited to announce the release of the seventh episode of its 12-part podcast series, On the Line With… American Standard Circuits: Ultra HDI. In this episode, “Solder Mask: Beyond the Traces,” host Nolan Johnson sits down with John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, to explore the essential role that solder mask plays in the Ultra HDI (UHDI) manufacturing process.
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.