-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Growing Need for UHDI
November 30, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
![](https://iconnect007.com/application/files/5516/9086/8978/Jan_Pedersen_2022.jpg)
Jan Pedersen of NCAB Group is deeply involved in IPC standards development surrounding ultra HDI and keeps his finger on the pulse of the industry surrounding this type of fabrication. With Asia still dominating this area, Jan sees the need for U.S. and European PCB fabricators to make the investment if they want to stay competitive.
Nolan Johnson: Jan, you’re very involved in UHDI design and manufacturing. What’s your perspective on these topics within the industry now, and where UHDI is going?
Jan Pedersen: There are seven to 10 factories globally that can produce what we call ultra HDI. The definition for UHDI is 50-micron and below track and gap. You can use subtractive methods down to, let’s say, 35 or 40 microns, and then when you creep down below that level you need mSAP or xSAP technologies.
That has been around for many years. It’s not really a new technology. It was introduced into the packaging or the component industry in the 1970s and ‘80s, but it was brought up again when Apple and others started to do smartphones. There are those factories that are involved in this, but they are factored for one customer, so it’s very hard for a smaller customer to get into UHDI, and most companies are smaller than Apple.
If you are a bit smaller, you don’t get access. It’s simple as that. I’ve tried it myself, tried to place an order with a big European PCB group that claims they have the capability. But when you have your Gerbers and your data and you want to produce boards there, they say, “Oh, sorry. This is basically for one customer,” and they don’t accept us putting their competitors, which could be anybody, into the same factory.
Johnson: Given that, what is driving the development of UHDI?
Pedersen: For us, it’s coming from telecom and 5G, and you assume we’ll see 6G. But quite a few of our customers come from these industries. We see that need growing in the automotive and medical industries, and I’m discussing it almost globally. I’m looking to see if there is any availability of production capabilities in the U.S. today. We don’t find it. There’s one factory in Europe that has limited capacity, and then the rest are in Asia and producing for the big names.
Johnson: Where does HDI stop and UHDI begin?
Pedersen: Let’s use the ultra HDI definition of 50 microns down. It’s subtractive down to approximately 40 microns.
Where we are today approximately on BGA pitch below 350 microns, we talk about pads of 140, and then you are basically into mSAP or substrate-like PCB technologies, whatever that is. There are quite a few technologies out there now that can be used. But we see that we are going from a subtractive into an mSAP level; this depends on where you are coming from and how far you are coming with the investments in your factory, because some of the factories that are producing mSAP have invested in imaging, AOI—everything needed for that resolution now.
When you have a subtractive in that factor, they can go quite far down here. But if you don’t have all the other investments and just go for mSAP, that doesn’t help you.
I’m saying this as background because you have this producibility level C in IPC-2226, where you have 50-micron track and gap. Everything below that is ultra HDI—substrate-like PCBs can be produced by either subtractive or SAP-related technologies. If you go below that again, down to 15 to 20 microns, you need an embedded trace substrate or similar technologies. Then of course you come to high-end IC substrates which are in single microns.
In the U.S. today for substrate-like PCB, it’s below 50 microns, not touching 20 microns, but maybe 35 or 40. When I had my Gerbers and asked for quotations, they said they couldn’t do it. They do have mSAP equipment, if you can call it that, or a process in-house, but have not yet invested in the imaging and AOI that is able to detect down to 20 microns. I think they stop somewhere around 35 today.
To read this entire conversation, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Suggested Items
Calling All California Employers: Harness State Funding for Workforce Training with IPC and ETP
09/05/2024 | IPCIPC, a global industry association dedicated to its member companies' competitive excellence and financial success, announces a pivotal opportunity for California employers under the Employment Training Panel (ETP) program.
WHMA/IPC Issues Call for Participation for Electrical Wire Processing Technology Expo 2025
09/04/2024 | IPCWHMA/IPC invites engineers, researchers, academics, technical experts, and industry leaders to submit proposals for the Electrical Wire Processing Technology Expo (EWPTE), to be held May 6-8, 2025 at Baird Center in Milwaukee, Wis. The deadline for proposals is on November 8, 2024.
Opportunity Knocks
09/04/2024 | Michelle Te, IPC CommunityIPC member DETEX Corporation of New Braunfels, Texas, like so many similar companies, strives to cultivate a highly skilled workforce to meet the growing demand for electronics assembly professionals. But also like many companies, DETEX, which engineers and manufactures security products, has struggled to hire qualified workers. Most employees are hired without certification or experience. Providing on-the-job training (OJT) without technical instruction has been met with limited success.
TRI’s High-Performance Inspection Solutions at SMTAI 2024
08/27/2024 | TRITest Research, Inc. (TRI) is joining the upcoming SMTA International Exposition & Conference on October 22 – 24, 2024, at the Donald E. Stephens Convention Center, Rosemont, IL, USA.
Give Yourself an Edge at the IPC High Reliability Forum 2024
08/27/2024 | Marcy LaRont, PCB007 MagazineFor those who support military and defense products, few topics are more important than reliability, particularly as we venture into complex packaging requirements that accommodate next-gen chips and electronic systems. Recently, I visited with Teresa Rowe, IPC senior director, assembly and standards technology, to discuss the IPC High Reliability Forum (HRF), Oct. 9-10, at the McKimmon Center, in Raleigh, North Carolina. With topics that cover high-voltage electronics, standardized test methods, and assembly and solder joint X-ray challenges, it is clear that this event needs to be included on your annual conference calendar.