-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
This Month in Design007 Magazine: Mentor—Managing Small Problems for Profitability
March 26, 2020 | Andy Shaughnessy, I-Connect007Estimated reading time: 2 minutes
At DesignCon, I met up with Todd Westerhoff, product marketing manager for highspeed design at Mentor, a Siemens Business, to discuss common design profitability issues and cost-aware PCB design. He explains how simple problems can “slip through the cracks” and cause delays, what you can do, and how first-order analysis can make simulation accessible to designers who wouldn’t simulate otherwise.
Andy Shaughnessy: Tell us about how the “small stuff” can get you in trouble. You say that we, as designers, take care of the big challenges pretty well, but projects get held up anyway.
Todd Westerhoff: Lifecycle Insights ran a study about a year ago that I find to be quite telling. They asked companies questions, such as, “How much simulation do you use in your process? Do you hit the mark in terms of your time, budget, or release date?” The two most interesting findings had to do with schedule and budget. They found that only one in four projects gets delivered on time and on budget (in other words, according to plan).
Shaughnessy: Even that may be optimistic.
Westerhoff: You’re right. Digging deeper, 30% of projects were delivered on time, but only by pulling in additional staff, 28% were delivered late, and 17% of projects were canceled entirely (quite possibly as a result of resources pulled to bail out other projects). The bottom line is that design projects had a 25% success rate, and that’s a problem.
Why does this happen? Consider all the different requirements designers are trying to accommodate: SI, PI, EMC, mechanical clearances, vibration, reliability, and so on. Designers live in a world where all of these things have all become specialties or have expert domains. Designers have a network of specialists around them, whose time and input they need to move their design forward. The problem is that each specialist looks at a different slice of the design, but how does all that input get integrated and turned into a holistic view that guides design trade-offs? How do those decisions get made? Does the designer understand enough of each of the specialist’s inputs to make the right trade-offs in the design of the board? The answer, based on the success rate, is perhaps not.
Another fascinating thing was when we asked our customers about the challenges they have faced, they said, “It isn’t the hard stuff, like 112 Gb/s serial links or DDR5 interfaces, that we need help with. Those are big challenges, but we know to focus on those, and we solve them. It’s the simple stuff that we’re not focused on that often nails us.”
To read this entire interview, which appeared in the March 2020 issue of Design007 Magazine, click here.
Don't forget to check out the latest book from Mentor, A Siemen's Business The Printed Circuit Assembler’s Guide to… Advanced Manufacturing in the Digital Age. Visit I-007eBooks.com to download this and other free, educational titles.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.