Beyond Design: AI-driven Inverse Stackup Optimization
Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
PCBflow Helps Designers Choose Best Manufacturer for the Job
March 28, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
IPC recently partnered with Siemens for the development of IPC DFM profiles in PCBflow, a cloud-based platform that organizes manufacturers’ capabilities into DFM profiles, which helps designers ensure that they comply with their manufacturer’s capabilities and pick the right manufacturer for each job.
I recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Andy Shaughnessy: Susan, give us a quick background on PCBflow and the DFM profiles.
Susan Kayesar: Sure. PCBflow is an online platform and collaboration space for designers and manufacturers in the electronics industry. We enable transparent transfer of information between designers and manufacturers, which is something that is sorely missing in the industry. At a very functional level, we allow designers to upload their designs into a secure environment online and grab sets of pre-made DFM profiles. Basically, these are rules that represent either the constraints that they're looking to comply with or the actual manufacturing environment. To date, we have many suppliers of DFM profiles that are a representation of the real-life manufacturing environment. You can test your design for compliance with those rules, and you can communicate freely with the manufacturer that has provided these DFM profiles.
Our friends at IPC see this platform as critical to their objective of promoting the transparent transfer of necessary information. IPC came on board and provided nine DFM profiles, which enable our users to test for compliance with various aspects of IPC design standards. Evgeny Makhline is one of our “power users,” and he can speak a little about how Nistec has been using those profiles.
To read this entire conversation, which appeared in the March 2024 issue of Design007 Magazine, click here.
Share on:
Suggested Items
PCB Designers: Enhance Your Listening Experience With New Companion Download to the DFR Podcast Series
11/11/2024 | I-Connect007Exciting news for listeners of On the Line With... Designing for Reality, the popular podcast series hosted by I-Connect007. A 10-page companion guide featuring insights from ASC Sunstone’s expert Matt Stevenson is now available for download.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Introduction
10/16/2024 | I-Connect007 Editorial TeamDesign for Manufacturing (DFM) is defined as the practice of designing printed circuit boards that meet not only the capabilities of the customer’s assembly manufacturing process, but also the capabilities of the board fabrication process to provide the highest reliability at the lowest possible cost.
Routing, Final Fab, and QC: Don’t Miss the Final Episode of On the Line With… Designing for Reality
09/23/2024 | I-Connect007Don't miss the final episode of "On the Line With… Designing for Reality," in which ASC Sunstone General Manager Matt Stevenson wraps up his deep dive into the PCB manufacturing process with a discussion of Routing, Final Fabrication, and Quality Control.
ASC Sunstone Circuits to Exhibit at the Anaheim Electronics & Manufacturing Show (AEMS) 2024
09/16/2024 | ASC SunstoneAmerican Standard Circuits | ASC Sunstone will be exhibiting at the Anaheim Electronics & Manufacturing Show 2024 to be held October 2-3 at the Anaheim Conventions Center in Anaheim, California.
Surface Finish: Tune in to the Latest Podcast Episode of On the Line with… ASC Sunstone
09/04/2024 | I-Connect007Don't miss the latest episode of "On the Line with… ASC Sunstone: Designing for Reality," in which ASC Sunstone’s General Manager, Matt Stevenson, discusses the critical topic of surface finishes in PCB manufacturing.