-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Selecting a Selective Soldering System, Part 5
August 8, 2016 | Robert Voigt, DDM NovastarEstimated reading time: 3 minutes
For the conclusion of our selective soldering discussion, I thought it would be useful to do a quick wrap-up to remind potential buyers about some important considerations that affect the purchase decisions they make. So, here goes:
Buy the Right Machine for the Intended Purpose
Selective soldering is often touted as being the “latest and greatest,” but it’s not the best technology for all boards. The fact is, selective is a much slower process than wave because it has to process each lead or closely spaced set of components one at a time. Selective is the only way to solder through-hole components in a production environment on a mixed technology board or if there are obstructions on the underside of the board. But wave soldering is by far the fastest way to preheat, flux and solder a board with only through-hole components.
Wave soldering dates back to a time even before integrated semiconductors were used, so it’s not a new technology. However, there have been many advances to the equipment as the industry has evolved, and it remains a very effective and cost-efficient manufacturing/assembly method to this day. No technology can match it for speed and no other method can improve on its joint strength.
Selective soldering is becoming much more common today, for very good reasons. It can process through-hole components on boards with mixed technologies, multiple shapes, patterns and devices; it is significantly faster and more reliable than hand soldering, so it’s a natural step up from a prototype setting to a production routine; once programmed, recipes can be archived to perform the same operation in exactly the same way in the future, ensuring reliable repeatability.
Hybrid boards exist for a number of reasons. In spite of the proliferation of surface mount components, which are perfect for high density functions on smaller and smaller footprints, through-hole devices are still used for high power applications and those with connectors which require a very strong, stable joint. And this is where selective soldering shines.
Understand the Process That’s Best for Your Assembly
While selective soldering does not necessarily replace a wave machine, depending on the nozzle type used it can replicate the wave technique in a compact way. For instance, a fairly large row of connectors/leads not in close proximity to SMD components could use a wide nozzle to swipe (or wave) the entire row at once. On the other hand, a small area situated near an SMD would require a very small nozzle to avoid disturbing the surface mount device.
There are myriads of standard nozzle designs for performing dips and drags, and they are limited only by your imagination or the complexity of the board. Selective gives you many ways to tackle a soldering routine, so you want to think about the sequence, the nozzle configurations you use, and the best way to save processing time. It may make sense to buy a custom nozzle if you have a high volume board with a unique profile. After all, nozzles aren’t very expensive and they last quite a long time.
Jet nozzles attack the board at about the same angle (7°) as a wave machine does and can deliver a high volume of solder using a tapered tip which guides solder roll-off in one direction, returning unused solder back to the pot from its trailing edge.
Wettable nozzles provide finer accuracy than jet type which makes them better suited to connections in close proximity to SMDs. It also produces less oxidation because there’s less contact with air. For this reason, wettable nozzles are also best suited for lead-free solder, which tends to be more vulnerable to oxidation.
To read this entire article, which appeared in the August 2016 issue of SMT Magazine, click here.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Nordson Electronics Solutions Expands the SELECT Synchro Selective Soldering Equipment Family With New Synchro 3 Release
04/03/2024 | BUSINESS WIRENordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, releases the Synchro™ 3, a new model in the SELECT® Synchro™ selective soldering equipment family for high-volume printed circuit board assembly applications.
Revolutionizing Precision Soldering: Introducing the iBot-i1/2s by Sasinno Americas
04/02/2024 | Sasinno AmericasSasinno Americas is pleased to introduce its latest advancement in soldering technology – the iBot-i1/2s. This cutting-edge system redefines precision soldering with groundbreaking features designed to elevate efficiency and performance in electronics manufacturing processes.