-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Counterfeit Detection Course: It’s the Real Deal
July 9, 2024 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
![](https://iconnect007.com/application/files/6317/2002/1390/Anthony_J_Bryant.jpg)
Anthony (Tony) Bryant is a trained expert in component counterfeiting techniques who has been collaborating with IPC on a new intermediate-level course on counterfeits. Tony is in final preparation to launch this course and shared his reasons for the course, as well as information about its content and value to EMS companies.
Nolan Johnson: Tony, tell me a little about yourself in the context of this course.
Tony Bryant: In my 35 years working with counterfeits, I have witnessed firsthand the pervasive issue of substandard and counterfeit electronic components. My journey began in the U.S. Navy, where I saw firsthand the consequences of equipment failures.
Upon transitioning to the civilian sector, I pursued advanced training at some of the military's leading electronics institutions, including ACI Technologies Inc., formerly known as the American Competitiveness Institute (ACI) in Philadelphia.
During the COVID-19 pandemic, the problem of counterfeiting escalated significantly. In the 2020-2021 timeframe, I personally encountered 19-20 instances where parts that had been previously identified, rejected, and confiscated by the government resurfaced in the supply chain. This recurring cycle of non-conforming materials poses a persistent threat to the industry.
As a result, I developed this intermediate-level course designed not only for test technicians and quality inspectors but also for procurement professionals and engineers who play a crucial role in managing electronic components. By equipping these individuals with the knowledge and skills to identify and mitigate counterfeit risks, we can collectively combat this growing challenge.
Johnson: What are some of the topics in the class?
Bryant: The course delves into some key topics, including the scope and consequences, supply chain impact, detection and prevention, mitigation and management, legal and regulatory frameworks, and finally, proper disposal.
Through this comprehensive training, participants will acquire the necessary knowledge and skills to effectively address the threat of counterfeit electronics, safeguarding their organizations, and ensuring the integrity of critical supply chains.
Johnson: Tony, who would you expect to take this course?
Bryant: Professionals who are working in any sector where component failures can have severe consequences—for example, supply chain professionals in high-reliability organizations, such as aerospace, defense, medical, and critical infrastructure sectors, which include the transit system, automotive industry, and so forth.
Regulatory compliance officers, quality assurance, and quality control personnel will normally undergo the training. Now, engineers and procurement sourcing specialists can do that as well. One emerging area is the healthcare industry. Historically, they’ve refused to believe they have counterfeit parts in their organization. The thing is that everyone has problems with counterfeiting.
To read this entire conversation, which appeared in the July 2024 issue of SMT007 Magazine, click here.
Suggested Items
Dr. Jennie Hwang to Deliver Course on AI Opportunities, Challenges, Possibilities at SMTAI
08/28/2024 | Dr. Jennie HwangDr. Jennie Hwang, Chair of AI Committee of National Academies/DoD AI study, Chair of Review Panel of National AI Institute of NSF, and Committee of Strategic Thinking for Engineering Research in the Era of Artificial Intelligence of NSF, brings broad-based information and insights through an integrated perspective to the AI course.
Why You Need to Take This New ‘Semiconductor Essentials’ Course
08/26/2024 | I-Connect007 Editorial TeamRecently, Andy Shaughnessy and Nolan Johnson met with Soo Lan Cheah, the developer of a new IPC course geared toward PCB manufacturing professionals who have little to no knowledge about semiconductor manufacturing. With her background in PCB and IC design, Soo Lan brings a circumspect vision of these disciplines and how they are inter-related. You don’t need to know a lot of math to take this course, and you’ll come out with a much better understanding of the whole silicon-to-systems approach.
FTG Announces Acceptance by TSX of Normal Course Issuer Bid Renewal
08/22/2024 | Globe NewswireFiran Technology Group Corporation announced the acceptance by the Toronto Stock Exchange (TSX) of FTG’s Notice of Intention to make a Normal Course Issuer Bid (NCIB), renewing the NCIB that expired in June 2024.
Elevate Your Career With Technical Skills Training
08/01/2024 | Kelly Allen, IPCCountless working individuals across the globe seek employment opportunities that foster personal and professional growth. According to Gallup research, 87% of millennials—the largest working generation in the U.S.—emphasize the importance of professional development and career advancement opportunities. Are you one of them?
Enhance Your Electronics Expertise Through IPC Courses in August
07/25/2024 | Corey Lynn, IPCAs the global leader in standards, training, and certification for the electronics industry, IPC is pleased to announce an array of upcoming online instructor-led courses this August. These courses are designed to equip professionals with the latest skills and knowledge required to excel in the ever-evolving field of electronics manufacturing and design. Whether you want to deepen your expertise in PCB design and manufacturing, understand the intricacies of intermetallic compounds, or learn about counterfeit part mitigation, IPC has a course tailored for you.