Latest Articles

A Deeper Look at the CHIPS Act Investment

In this interview with Chris Peters at U.S. Partnership for Assured Electronics (USPAE), Nolan Johnson seeks for better understanding regarding the implications of funding the CHIPS Act. Frankly, where and how will the $52 billion be spent? Who will decide how the funds are allocated? And surprisingly, who will benefit the most from this boost into the microelectronics industry?

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week we have quite a variety of articles for you. There has been so much electronics industry news coming out of Washington, D.C., that it can be hard to keep track of what’s going on. So, Editor Michelle Te compiled a handy-dandy reference guide to recent legislation news, including our exclusive coverage. We need to keep an eye on these senators and representatives. They’ve been talking about the importance of our industry for the past year, but this is an election year, after all. They’ve been known to say one thing and do another.

I-Connect007 eBook Introduction: The Evolving NPI Process

Thanks to marketing and advances in technology, we have all come to expect that the electronic products we buy will be closely aligned to our individual and specific lifestyle or business requirements. This expected variability, in personal function and style, as well as regulatory compliance and a changing global economic landscape, has made designing and producing new products a challenging prospect. And, on top of the resulting “high-mix, low-volume” production cycles, increasingly more products contain electronic components in varying levels that heighten the complexity of design and manufacturing.

Happy’s Design Tips for Material Conservation

For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board. We hope you can use this handy formula on your next design job.

Board Pricing Challenges and Opportunities

The cost of everything is on the way up, and fabricators are feeling the squeeze. They may hesitate to raise their prices because they don’t want to scare off business, but what options do they have? We asked James Hofer, general manager of Accurate Circuit Engineering, to weigh in with his thoughts on this conundrum.

What’s Going On in Congress? Your Handy Guide to PCB Legislation Headlines

We know you have so many questions about what the legislation means for you. Will there be funds to expand or upgrade my facilities? What about tax breaks? How will my specific needs be known? What will the current legislation mean for U.S. vs. China relations? Use this handy guide to get caught up, sort out the CHIPS from the USICAs, and be that someone who talks knowledgably at dinner parties.

IPC Advanced Packaging Symposium to Draw Industry, Government Representatives

Nolan Johnson speaks with IPC’s Chris Mitchell, vice president of global government relations, and Matt Kelly, chief technologist, about the inaugural IPC Advanced Packaging Symposium, scheduled for October 11-12, 2022 in Washington, DC. In this conversation, Mitchell and Kelly detail the symposium's objectives, presenters, and the value to both fabricators and assemblers in attending.

Unimicron July Sales Up 29% YoY

Taiwan-based printed circuit board (PCB) manufacturer Unimicron Technology Corp. has posted July sales of NT$11.78 billion ($390.77 million at $1:NT$30.14), down by 4.4% from the previous month but up by 29% year-on-year.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Can it be Friday already? Seems like I’ve just barely put away my Tuesday dishes. Some weeks, I wonder where my days went as they fly by so fast I hardly even realize it. As I looked back through the news for the week, it was clear why everything went so fast: There was a lot going on. The news this week had a nice feel to it. It seems like the industry is starting to gain some traction again with shows, mergers and acquisitions, and companies getting to do those “extras” that they wanted to do before the pandemic reared its ugly head. It had a little of that “back to normal” feel, even if we aren’t quite there yet. What do you think? Are we normal yet?

Time for a Price Hike?

If you manage a fabrication facility, we don’t envy you. You’re being hit on all sides with price increases, you’re traditionally leery of raising your own prices, but you must do something. Do you raise prices, trying to squeeze out more efficiency, or is it some combination of both? We asked Prototron President Dave Ryder and I-Connect007 columnist Dan Beaulieu to share their thoughts on the current fab pricing environment, the need for greater cooperation, and some pricing strategies for fabricators who are nervously eyeing their bottom line.

Catching Up With NEXTGEN’S Ravi Kumar

Companies from India are becoming more sophisticated by providing complete engineering services as well as design, production, and assembly of printed circuits. In this conversation with Ravi Kumar, director of operations at NEXTGEN PCB, I learned that even though the company is only a few years old, it’s already making its mark in the industry. Ravi has a plan to not only expand in India, but to enter the U.S. and UK markets with his company’s services.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

There was some good news this week, as Republicans and Democrats managed to cooperate long enough to pass the CHIPS Act. Members of the House and Senate don’t usually act until they get worried about being voted out of office, so pardon me if I’m not ready to sing “Happy Days Are Here Again” just yet. But this is still really good news; the politicians are on the record now, and we can hold them accountable.

Today’s M&A: Right on Target

In this enlightening conversation with M&A specialist Tom Kastner, Nolan Johnson learns that it’s a buyer’s market—and a seller’s market too. This sets up an interesting dynamic no matter which side you might be on. What trends are in play that have led to this situation and how can you make the most of it? Tom shares valuable insights that will get you thinking and planning your own strategies.

Excerpt Chapter 5: 'The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2'

Chapter 5 of the 2nd Volume from The Printed Circuit Designer's Guide to... Thermal Managment with Insulated Metal Substrates provides examples of thermally enhanced prepregs and cores now available in the market with the versatility to solve a wide variety of challenges. Included in this chapter you will find examples of simple designs and more complex hybrid assemblies that combine multilayer and single-layer areas on the same board.

Printed Circuit Boards: Past the Lobby and Onto the Floor

There has not been a time in recent memory when the U.S. legislative body is putting as much focus on the microelectronics industries. One bill, the CHIPS Act, was signed into law last year. A new bill introduced this year seeks to allocate funding for printed circuit board fabrication. In this exclusive interview, our team spoke with Travis Kelly, CEO of Isola Group and president of the Printed Circuit Board Association, and U.S. Rep. Blake Moore (R-Utah), who has co-sponsored the bill now before the House. Travis and Blake both express optimism about onshoring domestic production, but the realities of the legislative calendar may pose some risks.

Challenges of the 2022 PCB Market: The Party’s Over

With his knowledgeable insight into the business and technology of the printed circuit industry, Dr. Shiuh-Kao Chiang, managing partner at Prismark Partners, has put a global perspective on the challenges of the 2022 PCB market. His presentation at the EIPC Summer Conference in Orebro, Sweden, on June 14 was eagerly awaited by an attentive audience, keen to share his vision. From his comments, it was clear that 2022 will be an interesting year and does not appear particularly friendly for the PCB business.

IPC's I-Connect007 Acquisition Update With John Mitchell

Editor Nolan Johnson speaks with I-Connect007 Publisher Barry Matties and IPC President and CEO John Mitchell about IPC's acquisition of the publishing company, and what this means to I-Connect007's readers.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.

Q4 Concerns: Hold on to Your Hats

IPC Chief Economist Shawn DuBravac has plenty to share about the state of the U.S. economy and how the electronics manufacturing industry might weather the storms of high inflation, rising interest rates, and low unemployment. It’s an interesting situation to find ourselves in as the flurry of opinion on a 2023 recession starts to take shape. Does it make sense to invest in PCB fab now? And how does the rest of the world feel about it? Shawn gets to the bottom line.

New Book from I-Connect007 Examines Evolution of Electronics Industry NPI

The Electronics Industry’s Guide to… The Evolving PCB NPI Process is the first book in I-Connect007’s new The Electronics Industry’s Guide to… technical series. This valuable resource is for all segments of the electronics interconnect industry.

The Practical Side of Using EM Solvers

Electromagnetic (EM) solvers based on Maxwell’s equations have proven invaluable in the advancement of digital electronics and wireline communications. Plain and simple, electrical engineers need to know what a circuit or electrical interconnect will do when excited by a dynamic or varying signal. In the signal integrity world, an interconnect that passes a DC connectivity check can completely fail at higher frequencies. In the power integrity world, a power rail that measures the correct DC voltage could easily go into oscillation when a dynamic load is applied. Learning the basic skills to fire up an EM simulator, obtain qualitative answers in minutes, and higher fidelity answers in a few days, can be the difference between sleepless nights of product failures vs. robust designs with wide design margins.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Our biggest news this week: I-Connect007 has been acquired by IPC. Every member of the team, including founder and Publisher Barry Matties, is included in this deal. We’ve enjoyed working closely with IPC for decades, especially at events like IPC APEX EXPO, and we have four IPC columnists writing in our magazines and newsletters. This move makes sense for both parties. It enables us to take our magazine, newsletters, and book publishing to the next level, and IPC won’t have to spend years building a media company from the ground up. It really is a win-win.

Webinar Review: Thermal Integrity of High-Performance PCB Design

Electrical and mechanical engineers may be working on the same product development teams, but they speak different languages, and they have completely different objectives. As a result, these folks almost never use the same software tools. But Cadence’s new Celsius Thermal Solver is an exception to the rule. In a new CadenceTECHTALK webinar, “How Static and Dynamic IR Drop Analysis Can Help PCB Designs and Challenges,” product manager Melika Roshandell and SerDes SI/PI engineer Karthik Mahesh Rao explain how the EE and ME can both use the Celsius Thermal Solver to achieve their disparate objectives.

IPC Acquires Media Company I-Connect007, Strengthening Relationship to Drive Growth and Innovation in the Electronics Industry

IPC, a global electronics manufacturing industry association, has acquired media company I-Connect007, a global source for news and original content serving the printed circuit design, fabrication and assembly/EMS markets.

PCB Finance Class With Jeff De Serrano

Class is in session! PCB Technologies President Jeff De Serrano takes us through some of the struggles of the PCB industry over the past 30 years, how U.S. legislation seeks to level the playing field, and whether a “monopoly” of fabricators is healthy for our industry. In his chat with Nolan Johnson, Jeff gets out his investment playbook and talks strategy. Don’t miss this one.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in