Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
iNEMI Presents Packaging Interconnect Material Technology Series with Dr. Kazuhiro Nogita
September 9, 2024 | iNEMIEstimated reading time: Less than a minute
iNEMI, a leading electronics manufacturing industry association, is pleased to announce a two-part webinar series focusing on packaging interconnect material technology. Dr. Kazuhiro Nogita, a leading expert in the field, will present on September 17-24, 2024.
Webinar Series Details:
The webinars will provide valuable insights into:
- Properties of SnBi Low-Temperature Solders (September 17): This session will delve into the fundamental properties of tin-bismuth (SnBi) solder alloys, exploring their unique characteristics and challenges in high-strain rate deformation and thermal cycling.
- Transient Liquid Phase Bonding for High-Temperature Soldering Processes (September 24): This webinar will explore the use of transient liquid phase (TLP) bonding for reliable high-temperature interconnections with SnCu solders.
About the Speaker:
Dr. Kazuhiro Nogita is a highly regarded researcher with extensive experience in lead-free solders, interconnect materials, and more. He holds key positions at the Nihon Superior Centre for the Manufacture of Electronic Materials (NS CMEM) and the University of Queensland.
Registration:
Both webinars are open to industry professionals. Advance registration is required. Please visit the iNEMI site to register:
Share on:
Suggested Items
DELO Introduces UV-approach for Fan-out Wafer-level Packaging
10/25/2024 | DELODELO has developed a new approach for fan-out wafer-level packaging (FOWLP). Its feasibility study shows: With the use of UV-curable molding materials instead of heat curing ones, warpage and die shift can be reduced significantly. Additionally, this leads to improvements in curing time and minimizes the energy consumption.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 4
10/03/2024 |Chapter 4 of this book addresses the challenges in ensuring high electrical reliability of low-temperature solder pastes in modern electronic assembly. Also covered is the need for new-generation materials due to advancements in technology. The authors also explore the impact of flux components on electrical reliability and the formulation considerations to achieve higher reliability.
Indium to Showcase Industry-Leading Solder Paste and Alloy Technology at Detroit Battery Show
10/01/2024 | Indium CorporationAs one of the leading materials providers to the electronics assembly industry, Indium Corporation® is proud to feature its industry-leading Durafuse® solder technology at the Battery Show North America, October 7-10, in Detroit, Michigan.
Book Excerpt: The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2, Chapter 4
09/25/2024 | I-Connect007 Editorial TeamDirect-bonded copper (DBC) with a ceramic base is a commonly used assembly technology. While advantages include excellent solder crack compensation due to similar CTE values between component and substrate, the construction is fragile and therefore places limits on size and exposure to vibration. Small assemblies in basic shapes such as a rectangle can be done, although larger, more complex shapes become difficult.
Some Fundamentals of Tin-Bismuth Metallurgy and Electromigration
09/24/2024 | Prabjit Singh, Raiyo Aspandiar, Haley Fu, and L. A. SwaminathanNear-eutectic tin-bismuth alloy is a strong contender as the solder of choice for low-temperature electronic assembly applications. This article will describe the recent significant developments by the iNEMI project team on the understanding of the electromigration behavior of Sn-Bi solder which has a unique physical metallurgy and electromigration behavior quite different for that of Sn-Ag-Cu (SAC) solder and other solders in common use today.