- pcb007 Magazine
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
In this issue, the biggest names in PCB manufacturing share their economic outlook for the upcoming year and beyond. As you will see, they were all bullish on our industry, but there was some apprehension as well. No one wants to get burned by another the supply chain disruption.
- Events||| MENU
- pcb007 Magazine
Estimated reading time: 3 minutes
The European Angle
By Pete Starkey
< Back To Columns
Contact Columnist Form
Top 10 SMT Tech Tuesday Articles of 2014
Technical Editor Pete Starkey presents his list of the top 10 SMT Tech Tuesday articles for 2014. The year's topics cover a wide range and include printed electronics, lead-free processes, preventing tin whiskers, stencil printing challenges, and thermal management issues.
At #10, Nanocopper-based Solder-free Electronic Assembly Material, by A. A. Zinn, R. M. Stoltenberg, J. Beddow, and J. Chang, Lockheed Martin: In response to government legislation and regulation around the world regarding lead content in consumer electronics, electronics producers have quickly converted to lead-free tin/silver/copper (SAC) solder. This paper from experts at Lockheed Martin outlines the development of a novel nanocopper material--from synthesis to board level integration--as a solder-free electronic assembly material.
At #9, Meeting Future Stencil Printing Challenges with Ultrafine Powder Solder Pastes, by Edward Briggs, Indium Corporation: Solder pastes comprised of finer particle solder powders may help with stencil printing, but increased surface oxide associated with finer powders may also reduce the reflow process window. This paper provides a comparison of the transfer efficiency of different solder powder particle sizes and visually observes post-reflow results in both optimal and harsh conditions.
At #8, Head-in-pillow X-ray Inspection, by A. Castellanos, Dr. Z. Feng, D. Geiger, and M. Kurwa, Flextronics International Inc.: Identifying product defects associated with the manufacturing process is a critical part of electronics manufacturing. In this project, the authors focus on how to use AXI to identify BGA head-in-pillow (HIP), which is challenging for AXI testing. The goal is to understand the capabilities of current AXI machines.
At #7, Influence of Microstructure on Mechanical Behavior of Bismuth Pb-free Solders, by David B. Witkin, The Aerospace Corporation: Certain alloys that contain bismuth have shown superior reliability in PCB testing, but they have not been widely used in electronics manufacturing due to their Bi content. This article focuses on the microstructure and behaviour of Bi-containing alloys, and compares this data with that of SAC305.
At #6, Conformal Coating Over No-clean Flux, by Karl Seelig and Timothy O’Neill, AIM: As the proliferation of modern-day electronics continues to drive miniaturization and functionality, electronic designers and assemblers face the issue of environmental exposure and uncommon applications never previously contemplated.
At #5, Testing Intermetallic Fragility on ENIG Upon Addition of Limitless Cu, by Martin K. Anselm, Ph.D. and Brian Roggeman, Universal Instruments Corporation: Authors Dr. Martin Anselm and Brian Roggeman present data concerning the intermetallic strengths and failure modes of two bond pull test methods. Specifically hot bump pull (HBP) and cold bump pull (CBP) testing are compared where Cu is added by the copper pins of the HBP tester or by Cu power in a second reflow followed by CBP testing.
At #4, Grain Refinement for Improved Lead-free Solder Joint Reliability, by K. Sweatman and T. Nishimura, Nihon Superior Co., Ltd and S. D. McDonald, M. Whitewick, and K. Nogita, University of Queensland: While grain boundaries can themselves contribute to failure, the reduction in the anisotropy of a solder joint by increasing the number of randomly oriented grains would be an advantage and the observation has been made that joints with a finer effective grain size last longer in thermal cycling than otherwise expected.
Page 1 of 2
More Columns from The European AngleCircuitData: A New Open Standard for PCB Fab Data Exchange
I Never Realised It Was So Complicated!
The European Angle: Institute of Circuit Technology 43rd Annual Symposium
Ventec International Group's Martin Cotton Celebrates 50 Years in PCB Design
Reporting on the Institute of Circuit Technology Spring Seminar
EuroTech: Raw Materials Supply Chain—Critical Challenges Facing the PCB Industry
EuroTech: ENIPIG—Next Generation of PCB Surface Finish
EuroTech: Institute of Circuit Technology Northern Seminar 2016, Harrogate