Latest Articles

RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling

Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.

RTW IPC APEX EXPO 2019: Manncorp Highlights Custom SMT Lines

Ed Stone, sales manager for Manncorp Inc., sits down with I-Connect007 Guest Editor Dan Beaulieu and discusses how they are helping customers with low- to medium-volume type production needs by installing custom SMT lines within 48 hours.

Advice to OEM System Designers

In a recent I-Connect007 survey, we asked the following question: "What advice would you give an OEM system designer?" Here are just a few of replies, slightly edited for clarity.

RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment

Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.

RTW IPC APEX EXPO 2019: MacDermid Alpha Highlights Solutions to Combat Voids in Solder

Joe Fjelstad speaks with Paul Salerno, global portfolio manager at MacDermid Alpha Electronics Solutions, about their latest product and process solutions to combat voids in solder including modifications in pastes, preforms, and vacuum assist soldering.

RTW IPC APEX EXPO 2019: Comet Group's Lab One Facility in Silicon Valley

Joe Fjelstad speaks with Ken Burden, senior director of North American field service, and Craig Arcuri, business development, about Comet Group’s Silicon Valley-based Lab One customer center, which is a key resource for a variety of testing and inspection services, and also offers opportunities to collaborate with Comet Group's industry experts.

Award-winning Koh Young Process Optimizer

Joel Scutchfield, sales director with Koh Young America, discusses the company's outlook and new product offerings for 2019, including their Koh Young Process Optimizer (KPO), which won an award at IPC APEX EXPO 2019 for the process control software category.

Dan Schoenfelder: Searching for Parts in Real Time

The I-Connect007 editors recently sat down with Dan Schoenfelder, vice president of business development at Octopart. We discussed online parts libraries and the impact they can have on choosing parts based on availability data during the design process.

Improving the Efficiency of Your PCBA Production

Ensuring you're hitting your build times is always a major priority in surface mount production. The challenge for many OEMs, however, is that the processes involved with PCBA can be numerous and complex. And the smallest of details can make the biggest of differences.

A Drone's-eye View of the IPC APEX EXPO Show Floor

If you couldn't make it to IPC APEX EXPO in San Diego, don't worry. We have full coverage of this annual must-attend event, from the opening ceremony to the close of the final day. To get a sense of the size of this year's show, check out our drone's-eye view of the show floor. Can we name our drone Air007?

TUM Hyperloop Team Learns PCB Design on Way to Setting World Speed Record

At AltiumLive Munich, I met with Tobias Bobrzik, a Technical University of Munich student and member of the TUM Hyperloop team. In 2018, the TUM Hyperloop team’s prototype pod set the world speed record of 290 miles per hour, which lead to their meeting with Musk. Tobias designed some of the PCBs used in that vehicle, so I asked him to tell us more about this experience, and what he hopes to do after graduation.

Flex Circuit Supply Chain Challenges

In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues

Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

RTW IPC APEX EXPO 2019: Enabling Complete Automation for Customers

Steve Williams and Saki CEO Norihiro Koike discuss Saki's AOI equipment and complete solution for electronic manufacturers, the industry-leading accuracy of their 3D equipment, and their recent Panasonic IoT certification to provide process data back to the pick-and-place equipment.

RTW IPC APEX EXPO 2019: Panasonic Highlights New Products, IPC STEM Student Outreach Program

Sean M. Murray, GM of North American Sales EAG Group for Panasonic, and Nolan Johnson, I-Connect007 Managing Editor, discuss two new product announcements at the show—PanaCIM process tracker software and MPM-WX—and being a sponsor for the IPC STEM Student Outreach Program.

Super Dry Storage Options to Manage Intermetallic Growth

Guest Editor Kelly Dack speaks with Richard Heimsch, director of Super Dry, about some of the differences between storing components and other materials for assembly floor storage versus long-term storage, and how Super Dry can help combat intermetallic growth.

RTW IPC APEX EXPO 2019: New IPC Technical Education Program Manager

Brook Sandy-Smith discusses her new role as IPC technical education program manager, which is also a brand-new IPC position. She further explains the benefits of membership, when a member should contact her, the IPC STEM Outreach Program, and upcoming events.

Supply Chain in Crisis

In a traditional design flow, the project team tends to use the parts they already know and have footprints for—maybe a little long in the tooth, but known quantities, after all. Except these are not traditional times. Component supplies, prices, and lead times are in a great deal of turmoil. The automotive, IoT, and telecommunications sectors are vacuuming components out of the supply chain at a record pace, exerting influences like early obsolescence of older components and more.

Joe Clark Discusses DownStream’s Updated Tool Lineup and IPC-2581

DownStream Technologies recently revamped their entire product line, from CAM350 through BluePrint-PCB. DownStream co-founder Joseph Clark and Guest Editor Kelly Dack discuss some of these updates, including a new GUI and capabilities such as 3D analysis, as well as news about IPC-2581.

Critical Process Issues

In our recent I-Connect007 survey, we asked what the top three critical issues are in the production process. Below are just a few of the replies, slightly edited for clarity.

RTW IPC APEX EXPO 2019: KYZEN Intros New Aquanox Aqueous Cleaner

In an interview with I-Connect007 Technical Editor Pete Starkey, KYZEN Executive VP Thomas M. Forsythe introduces the latest member of the Aquanox family of aqueous cleaners and comments on issues of compatibility, rinsability, and consistency of operation.

RTW IPC APEX EXPO: Zentech on the Fourth Pillar of DoD Acquisitions, and NIST

Steve Williams speaks with John Vaughan, VP of sales and marketing for Zentech, about their dominance in the military/aerospace market sector, the new "fourth pillar of DoD acquisitions," and how companies that do not take the NIST initiative seriously will be quickly left behind.

IPC APEX EXPO 2019 Show Week Time-lapse Video

From set up to tear down, I-Connect007 captured a 4-day time-lapse video of the show floor from our Real Time with... IPC APEX EXPO booth. In addition, this video includes overhead shots of each of our generous premium sponsor's booths.

RTW IPC APEX EXPO 2019: ASM Updates Mid-Level Machines

ASM CEO Americas Jeffery L. Timms and Technica President and CEO Frank Medina give Nolan Johnson a product update on ASM's mid-speed machines—EbySIPLACE and EbyDEK. By bringing key features from ASM's high-end products to their new mid-level models, ASM's new machines are gaining attention Timms and Medina discuss the how and why.

RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability

Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.

IPC APEX EXPO 2019: It's a Wrap!

The IPC APEX EXPO 2019 show floor closed yesterday with applause. After three days of meetings, networking, and tire kicking, if you will, exhibitors head back to their offices with a list of leads, to-do lists, and stories to share. Meanwhile, attendees now head home with important decisions to make about what they learned and who they want to do business with.

IPC APEX EXPO 2019 Day Two: Do You Hear That Buzz?

On the IPC APEX EXPO show floor Wednesday, the energy and action peaked with control software and interconnected machine communication continuing to be the buzz at the show.

RTW IPC APEX EXPO: OK International Soldering Robot Integrates CV Technology

Bryan Gass, vice president at OK International, talks with I-Connect007 Managing Editor Nolan Johnson about their new soldering robot that integrates their Connection Validation (CV) technology. Launched at the IPC APEX EXPO last year, the CV technology provided the company a springboard to have a good start into 2018, and to achieve growth throughout the year.

Benefits of Jet Printing Solder Pastes

In a recent I-Connect007 survey on jet printing solder pastes, we asked the following question: "What are the major benefits with jet printing solder pastes?" Here are just a few of the replies, slightly edited for clarity.

RTW IPC APEX EXPO 2019: For Elmatica, the Future is All About Data

At this year's IPC APEX EXPO, guest editor Judy Warner sits down with Elmatica CEO Didrik Bech to discuss the company's business model and CircuitData, their award-winning open-source PCB design data language.

Day One, Nothing but Fun: The Show Warms Up

The first official day of the IPC APEX EXPO 2019 was full of excitement, activity and business getting done. From the exuberant crowd at the ribbon cutting ceremony, to the closing moments of day number one, the show floor was bustling. Spirits were high from both attendees and exhibitors, sending the signal that optimism and business strength are still the industry mood.

RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues

Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.

The Designers Council: A Chapter Primer From the Ground Up

Thinking it might be a way to make new contacts with PCB designers in Orange County, I attended a couple of Designers Council meetings. The chapter president at that time was Paul Fleming, who asked me to be part of his steering committee because he learned that I had spent decades in fabrication. Within a few months, he had gotten a job transfer to Arizona, so he twisted my arm to take over as the chapter president. I agreed, but little did I know that this would become a major turning point in my PCB career.

IPC Conferences Set the Tone for Innovation During IPC APEX EXPO 2019

Monday's docket of sessions at IPC APEX EXPO 2019 presented a wide-ranging array of topics, including the Automotive Executive Forum, the Connected Factory Initiative Workgroup mapping out the future of CFX, the DFX committee celebrating the release of the IPC 2231 Guidelines document, and the Critical Components Traceability Workgroup addressing the creation of a secure supply chain.

The Sun Rises on IPC APEX EXPO 2019

It's sunrise on Monday in San Diego, and IPC APEX EXPO at the San Diego Convention Center is already abuzz with activity. The exhibition hall setup is on schedule to open for business tomorrow morning, January 29th, 2019.

In the Studio: Real Time with…IPC

It's almost time for IPC APEX EXPO 2019 at the San Diego Convention Center, and that means another Real Time with…IPC video program bringing you interviews with the electronics industry's top movers and shakers, engineers, and managers.

AltiumLive Munich Draws Designers from Around Europe

I’m finally unpacked after last week’s AltiumLive PCB design summit in Munich. Much like the AltiumLive event I attended in San Diego last October, the conference drew hundreds of PCB designers. This marked the second AltiumLive PCB design summit held in Munich, and Altium seems to have it down to a science. I spoke with designers from Germany, Austria, the Netherlands, and Belgium, just to name a few countries. Many of them were involved in the automotive segment but some were in medical and industrial controls as well. It’s great to be at an event that is full of PCB designers, because designers are few and far between at most PCB industry events.

CES 2019: More Show Floor Favorites

In my final piece covering CES 2019, I will review more automotive technology, updates on 3D printing, and some trending devices such as smartwatches and new computer components for those that either need or just want to have extremely powerful and impressive-looking computers.

Happy Anniversary, Gerber Format: Looking Ahead to Digital Innovation

This year, we celebrate the 55th anniversary of the introduction of the Gerber machine language format. We can thank H. Joseph Gerber, the man who took manual PCB design to the next level with the automated photoplotter, for giving us this format in 1964. Gerber immigrated to the United States in 1940 with his mother following the death of his father during the Holocaust. Gerber started Gerber Scientific Instrument Company in 1948 to commercialize his first patented invention—the variable scale.

Most Important Attributes of Customer Service

In a recent I-Connect007 survey, we asked what the most important attributes of customer service are. Understanding and meeting the customer's needs and expectations top the list, followed by quality of service, and on-time delivery.

Electrolube Overcomes Secondary Cure Issues with New UV-cured Conformal Coatings

Electrolube Managing Director Ron Jakeman and Marketing Manager Julia Vorley speak with I-Connect007 Technical Editor Pete Starkey about the successful outcome of the international collaboration between the company's R&D teams in the UK and China, which resulted in a brand-new range of solvent-free UV-cured conformal coatings about to be launched at the upcoming IPC APEX EXPO 2019.

Mark Friedman on IPC Membership

Mark Friedman, a member success advocate at IPC, recently spoke with I-Connect007's Barry Matties about the current status of IPC's membership programs, the recent growth they've seen, and some hidden benefits of IPC membership that potential members might not be considering.

STEM: The Future of Our Industry

Facing a growing shortage of talented labor with which to fill the employment positions in America, IPC is working to help solve this problem. Colette Buscemi, senior director of IPC’s education programs, is encouraging IPC members to better engage pre-college and post-secondary college students at the local level. Barry Matties spoke with Colette about the educational programs IPC has put in place to invest in future generations, including the STEM program at this year’s IPC APEX EXPO.

IPC APEX EXPO 2019 to Demo Operating CFX Line

A year on from their first demonstration, IPC’s Connected Factory Exchange (CFX) now nears the release of version 1.0 at this year’s upcoming IPC APEX EXPO. The I-Connect007 team spoke with CFX specialists Michael Ford and Dave Bergman about how far the program has come from the first initial public demo all the way through now becoming a published standard, and what users can expect from the demonstrations planned for the 2019 show.

Mentor and Seica Partner for Data Prep and Testing Big Boards

Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

The Quest for Perfect Design Data Packages

There’s an ongoing problem in the PCB industry: fabrication shops are receiving incomplete or inadequate design data packages, leaving manufacturers scrambling to fill in the blanks. For a quick-turn prototype shop like Washington-based Prototron, with over 5,000 customers and up to 60% of orders coming from new customers each month, that can add up to a lot of wasted time and effort just in the quoting stage. Dave Ryder, Prototron president, and Mark Thompson, engineering support, delve into this continuing issue and more.

Solder Paste Selection/Qualification

In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.

The Future of the Customer Experience in Mobility

Based on the protocol stack that starts with 5G, moves up to AI, and continues to layer integrations and user interfaces and experiences on top of those lower-level technologies, how does this all apply to the current mobile experience? A panel on the future of mobility with representatives from several major companies covered this and more at CES.

Shopping at IPC APEX EXPO: Evolutionary or Revolutionary Products?

As you're finalizing your shopping list, take a second to consider this: Are you in the market for products that are evolutionary or revolutionary? And what do those terms even mean for someone looking for new DFM software or a new pick-and-place machine?

Dispatches from CES 2019: The Future in the Kickoff

Press kickoff briefings at the Consumer Electronics Show (CES) are no stranger to big claims and hyperboles. At the “CES 2019 Trends to Watch” presentation on Monday morning, Steve Koenig, Consumer Technology Association’s (CTA’s) VP of market research, made some pretty big claims about what we should expect to see at the show, but those claims don't seem at all to be hyperbolized.

Who’s the Best of the Best in Hand Soldering?

IPC APEX EXPO 2019 will include the new IPC World Championship Hand Soldering and Rework Competition on the expo floor on January 29 and 30. Twelve competitors from Britain, China, France, Germany, India, Indonesia, Japan, South Korea, and Thailand will compete for the crown and the title of the first-ever IPC World Hand Soldering and Rework Champion.

Executive Forum at IPC APEX EXPO 2019 Focuses on Advancing Automotive Electronics

Senior-level executives from across the global electronics supply chain will gather to discuss opportunities and challenges facing the rapidly changing automotive electronics industry. With five expert speakers and a powerful keynote from GreenSource VP Alex Stepinski, registration will fill fast.

More Than Inspection: It’s Process Improvement

Barry Matties speaks with Brian D’Amico, president of MIRTEC, about the current state of machine-to-machine communication in the industry, and how the inspection company is interfacing with the different manufacturing languages currently available to gather predictive data and feedback from every inspection step to eliminate future defects.

Most Important Feedback

In our recent I-Connect007 survey, we asked the following question: “What is the most important feedback that you receive after your board is manufactured?” Here are just a few of the replies, edited slightly for clarity.

MacDermid Enthone Discusses Consolidation Benefits

At the 2018 electronica exhibition in Munich, Frando van der Pas, director of marketing and sales for MacDermid Enthone—Europe, and Technical Editor Pete Starkey discussed the consolidation benefits and the vision and future of the company.

Welcome to the BIG Show!

This month, we celebrate the impact and reach of the IPC APEX EXPO slated for January 26--31, 2019, in San Diego, California. Have something truly new? It needs to be seen here at IPC APEX EXPO with long-standing products and evolutionary advances from industry stalwarts will grow their installed base here, too. There are other industry shows, but the must-go show for our industry is IPC APEX EXPO.

Susy Webb: The History and Future of the Designers Council

When we started planning this issue on the IPC Designers Council, I knew I’d have to speak with design instructor Susy Webb, a longtime DC member and currently an executive board officer. I asked Susy to discuss how she first got involved with the DC, why designers should join their local chapter, and what the future holds for this group.

Words of Advice

In our recent designer survey, we asked the following question: “What advice would you give an OEM system designer?” Here’s what our EMS experts said.

Top 10 Most-Read SMT Interviews of 2018

We continue our top 10 lists, this time with the most-read SMT interviews in 2018. Topping the list is an interview with Joe O’Neil and Matthew Becker of Power Design Services (PDS), along with Ted Park of Green Circuits, who announced their merger last year.

Dock Brown on Succeeding at Failure Analysis

Dock Brown of DfR Solutions gave a keynote speech at SMTAI, “Requirements for Both Cleaning and Coating to Building Medical Hardware.” Barry Matties and Happy Holden sat down with Dock to discuss the current trends he sees in failure analysis, the concept of “rules versus tools,” and how predictive engineering software used early in the design cycle can help predict failures in components and microvias and drive cost down.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in