Latest Articles

Modern Inventory Management Secrets

Inventory management should be simple; after all, it is how many of us learned to count. ERP solutions have become complex yet cannot solve our immediate supply-chain and manufacturing challenges unaided. It’s time to unfold the root-causes behind key issues and reveal the secrets for success in modern inventory management which have a significant impact on any manufacturing business.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

We’re officially in show season and Managing Editor Nolan Johnson just got back from SMTA International. As he says in his review, the show drew a sizeable crowd this year. With the pandemic in the rear-view window, let’s hope our trade shows are getting back to normal.

SMTAI 2022: Like a Tesla in a Drag Race

If you’ve ever experienced an electric car launching from a dead stop, felt the torque and acceleration that a motor made of magnets and copper coils can deliver over a combustion engine, then you’ll have a sense for how this year’s SMTAI took off—both literally and figuratively.

Warm Skies and a Warm Welcome in Minneapolis

The SMTA International show floor was fairly quiet Tuesday afternoon at the Minneapolis Convention Center, as most exhibitors had already moved in their equipment, set up their displays, and grabbed their attendance badges, all in anticipation for opening day on Wednesday. But it’s expected to be a completely different atmosphere as the show open and attendees start streaming through the doors. SMTA International is the biggest show of its kind in North America, and with the pandemic largely behind us, show organizers expected to see decent crowds on the show floor.

Sherry Stepp Honored as SMTA Member of Distinction

The SMTA has honored Sherry Stepp, global marketing manager, with a 2022 Members of Distinction Award. Stepp was chosen for an Excellence in Leadership Award. Sherry has been actively involved in SMTA activities as a KYZEN staff member for 25 or so years and has been a member herself since 2009. In this interview, Nolan and Sherry dish on what it means to receive the award, and some key moments that have been the most gratifying for Sherry on a personal level.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Halloween is next Monday and parties will be taking place over the weekend, I’m sure. Here in the United States, at least, the “any-holiday-is-an-excuse-for-a-party” crowd has integrated Halloween, along with Valentine’s Day, St. Patrick’s Day, and Cinco de Mayo into wide-ranging opportunities for themed revelry. The news this week has been a bit crazy as well, though certainly not alcohol-fueled. There was a lot of important news and narrowing it down to just five was thought-provoking yet ultimately rewarding. Here then, are the five top pieces of news you shouldn’t miss this week.

New Growth Opportunities Worldwide for BTU

It’s not just automotive and medical devices for which capital equipment manufacturers like BTU International are finding a market. It’s also not just domestic. Bob Bouchard says his company has seen an uptick in sales after the pandemic into more “purpose-built” equipment with sophisticated requirements and very tight process control. It’s meant an increase in sales staff as well. It’s encouraging news ahead of BTU International’s exhibit at SMTA International next week.

SMT Tooling, PSA: 'Perfect Marriage of Innovation and Product'

Jeffrey Pulaski describes the recent partnership between SMT Tooling and PSA, which brings SMT Tooling’s innovation and PSA’s manufacturing capabilities together. Pulaski also shares news on product development, and what visitors to SMTA International can expect to see in SMT Tooling’s floor presence.

Forming Standards for Ultra HDI

To get the latest news about ultra high-density interconnections (UHDI), we checked in with Jan Pedersen, NCAB Group’s director of technology. Jan is co-chair of IPC D-33AP, and a great source of overall DFM expertise as well. We asked him to give us a snapshot of UHDI in the industry, where we’re headed, and what this means to PCB designers.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Where did the year go? I can’t believe we’re planning our January and February issues now. It was 84 degrees most of last week in Atlanta, and now it’s 31. I guess I should take my Hawaiian shirts out of rotation! This week we have quite a variety of articles for you. It’s officially show time and the industry is back in business in a major way. We have some news coming out of last week’s advanced packaging event in Washington, D.C., and an article about navigating SMTA International, which opens on Halloween this year in Minneapolis. We have a great column on avoiding EMI with good routing strategies, and an article on electrically conductive inks. To top it off, I-Connect007 has published a new book, written by Matt Stevenson of Sunstone Circuits, that posits a new “design for”: Designing for Reality. If you’re a designer, isn’t designing for reality what it’s all about?

EMA Helps Ease Designers’ Supply Chain Woes

Supply chain issues are continuing to cause disruptions in our industry, though lead times have dropped from astronomical to merely troublesome. In this interview, Chris Banton, EMA Design Automation’s director of marketing, explains how Cadence’s software has evolved as designers’ needs have changed in the past few turbulent years, including providing designers with component availability data early in the process.

KYZEN Comes Clean For SMTAI

In this interview, KYZEN Executive Vice President Tom Forsythe explains his company’s plans for the upcoming SMTA International show in Minneapolis, Minnesota, Oct. 31-Nov. 3. He discusses KYZEN’s latest aqueous cleaning chemistries and the company’s focus on providing reliable cleaning equipment and accurate data for customers. "This is the latest in that expanded envelope, with better economics, and better environmental health and safety," he says. "It's all part of this trend of always trying to be a better product and deliver better value.

Time to Go ‘Exploring’ at SMTA International

Students, young professionals, and industry newcomers will have a unique way to network with subject matter experts at SMTA International 2022 in a fun and non-threatening way. “Passport to the World of SMT” is designed to assist “Explorers” in making connections with exhibitors during part of the annual trade show in Minneapolis.

SMTA International Technical Conference: Trending on Topic

One of the highlights of SMTA International is the Technical Conference, where more than 100 papers will be presented across at least 30 sessions. “Work that was delayed due to the effects of COVID has been completed and the amount of material coming from the industry is impressive,” says Julie Silk, VP of technical programs. “We have a packed conference this year in Minneapolis.”

EPTAC Primed for SMTA International

I recently spoke with Leo Lambert, vice president of technology for EPTAC, about the training company’s newest classes and his plans for the upcoming SMTA International. The event, co-located with the Medical Device & Manufacturing (MD&M) Show, takes place in Minneapolis Oct. 31—Nov. 3. It’s never a dull moment in this industry and Leo takes a few minutes to talk about his company’s certification efforts, what’s planned for SMTAI, and where some of this technology is headed. Swallowing a pill that measures diagnostics? It’s a great time to be in the industry.

Time to Go ‘Exploring’ at SMTA International

Students, Young Professionals and Industry Newcomers will have a unique way to network with subject matter experts at SMTA International 2022 in a fun and non-threatening way. “Passport to the World of SMT” is designed to assist “Explorers” in making connections with exhibitors during part of the annual the trade show in Minneapolis.

Sunstone and I-007eBooks Launch Book on Designing for Reality

I-007eBooks is excited to announce the release of the latest title in its series for designers, The Printed Circuit Designer’s Guide to… Designing for Reality. This book covers both written and unwritten rules for how to create a realistic, manufacturable design.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

I’ve been in Washington, D.C., most of this week, attending and reporting on the IPC Advanced Packaging Symposium. You’ll see more content from me in the weeks and months to come as I sort through and highlight the varied aspects of this ground-breaking event. If you’re in this industry, advanced packaging will affect you, make no mistake about it.

IPC Symposium: U.S. Must Address Critical Gaps in Advanced Packaging Needs

There is a significant capability gap in advanced substrate packaging in North America, forcing all semiconductors to be packaged in Asia and leaving North America at risk in its supply chain. This was a common theme during a two-day IPC Advanced Packaging Symposium, which launched yesterday at the Kimpton Monaco hotel in Washington, D.C.

Real Time with...SMTAI: VJ Electronix Introducing Component Auto Align Option

Nolan Johnson and James Bishop, eastern regional sales manager at VJ Electronix, prepare for the upcoming SMTAI conference in Minneapolis by discussing the current market challenges, changes in how EMS companies are making use of their rework stations, and how VJ Eletronix is meeting customers with new functionality.

Women’s Leadership Program: Technology Innovations and Career Advancement

While planning the theme for the 2022 Women’s Leadership Program (WLP) at SMTA International, we discussed the idea of skills as tools in your toolbox. We brainstormed on how to bring this idea to reality and enable women colleagues to advance their careers. We realized that taking the time to reflect on the skills you have in your toolbox makes you self-aware and recognize your self-worth. Knowing what you bring to the table helps you build the confidence you need to navigate your career. In this article, we detail the Women's Leadership Program, its speakers, and what you gain by attending.

Lessons Learned: Breaking Down the Four Types of Communication

Kelly Dack and Nolan Johnson explore the silver linings from the past two years, especially the importance of good communication. These skills are—as they have always been—key to the success of the project. But how do you define the best methods for communication? Kelly breaks down four personality types and why it’s important to recognize how one person differs from another. When you better understand how a person thinks, your level of effective communication increases exponentially.

SMTAI: Packed With Content!

We’re now in trade show season, and SMTA International is coming up at the end of this month, so I asked SMTA President Martin Anselm to discuss the show and what manufacturing professionals should expect to take away from this event, now in its second year at the Minneapolis Convention Center.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

It’s been a busy week for I-Connect007. Managing Editor Nolan Johnson and I covered PCB West at the Santa Clara Convention Center, and, as you’ll see in my article below the place was packed. We have an article about SMTA International, scheduled for the end of October. I think the trade show season is looking good into 2023. People are done with COVID shutdowns and ready to get back to live trade shows and conferences. We’ll be in Minneapolis to bring you the latest news and technical information. We also have a news report about the European Union committing to craft its own version of America’s CHIPS Act. There’s a great interview with Dana Korf and John Strubbe about the latest innovations in materials at TUC. And columnist Paige Fiet explains why she is committed to making manufacturing “cool” again to help recruit and retain young technologists.

It’s an Exciting Time in Electronics

SMTA International is just around the corner, and we are excited to be meeting fully in person and onsite. The conference and expo runs from Monday, Oct. 31 through Thursday, Nov. 3, returning to the Minneapolis Convention Center. Once again, we will co-locate with Medical Design & Manufacturing Minneapolis 2022 (MD&M). As the world continues to adjust to the new normal following nearly years of the pandemic, an in-person industry conference and exhibition is more valuable than ever.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week, our five must-reads include the IPC report on the EMS industry and a report on ICs for the automotive market. Add to that Lockheed’s highest powered DoD laser yet, IPC’s APEX keynote announcement, and—for you conference and expo junkies—a calendar of upcoming industry events. I can’t help but notice that much of our news is about, well, something new. In this case, my editor’s picks for the week capture new technology, new perspectives, new ways to communicate content, and new developments that we can expect to see in our future daily life. To borrow a phrase from the TV show “Firefly,” everything is “shiny” this week. I will be at PCB West, the IPC Advanced Packaging symposium, SMTA International, and electronica. If you see me, say hello, and share something cool about the part of the industry you’re in.

Catching Up With John Johnson, New Director of Business Development at ASC

It’s always good to catch up with old friends, especially when you can start working together. I recently spoke with my friend John Johnson, who has joined American Standard Circuits as the director of business development. At ASC, John will be using the Averatek A-SAP process that he was previously involved with. He shares some of his background and provides insight on the best ways to use this semi-additive PCB fabrication process that opens the capability window for forming trace and space.

Book Excerpt: The Electronics Industry’s Guide to… The Evolving PCB NPI Process, Chapter 1

The Electronics Industry’s Guide to… The Evolving PCB NPI Process is the first book in I-Connect007’s new The Electronics Industry’s Guide to… technical series. This valuable resource is for all segments of the electronics interconnect industry. What follows is an excerpt from Chapter 1: 'How the NPI Process Has Changed and Where We're Going'.

Some Relief, But Hold Off on the Party

To help PCB designers and design engineers get a clearer picture of the stress points in the industry, particularly from a company that deals directly with EMS providers, we reached out to CalcuQuote CEO Chintan Sutaria with a list of questions. The following Q&A explores trends in the PCB supply chain and heady advice for dealing with long lead times and counterfeit parts.

Finally, Some Good News About Supply Chain

In this follow-up to his recent interview on the Q4 2022 outlook, Shawn DuBravac, IPC chief economist, provides an update on the incoming supply chain for EMS providers. Naturally, this conversation centers on component availability, where the supply crunch is easing, and by how much. It doesn’t seem we’ll be seeing any across-the-board relief for some time to come, but Shawn’s higher-altitude perspective brings insight to your daily planning.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.

Pack Your Bags! We’ve Got Your Trade Show Calendar Here

It’s officially fall, and that means it's time to start planning your trade show attendance. To help you make decisions about when and where to go, we’ve put together a list of industry trade shows. It has been two long years with no or few in-person trade shows, and we’ve felt it. So, now we’re back in business and ready to hit the road. Do you have a show or conference to add to our list? Let us know!

IPC: Companies Are Intentional About Tracking Environmental and Social Risks

Leading companies in the electronics manufacturing industry are highly intentional about their environmental, social and governance (ESG) priorities, with climate change and energy use among the most closely scrutinized issues, an IPC analysis shows. As part of IPC’s ESG for Electronics initiative, IPC is interested in developing resources for members on the most common ESG methods and priorities of leading companies across the electronics value chain. In support of this, IPC has preliminarily analyzed the ESG reports of approximately a dozen companies in selected portions of the industry.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.

Axiom Inspired by Industry Challenges

After living through more than two years of the pandemic, we are very aware of the issues facing the electronics industry. We have witnessed months of factory shutdowns, labor disruptions due to a reduced workforce, and country, regional, and citywide COVID regulations and shutdowns. I will describe some of the issues we’ve been facing, and then explain how we learned to be creative and look for the silver linings in these disruptions.

Finding Some Breathing Room in Parts Supply

Electronics manufacturers like Emerald EMS are finding that as the consumer markets experience a slowdown, and supply chain woes are lightening, challenges persist. Chris Lentz, vice president of supply chain logistics, and Joe Garcia, vice president of sales and marketing, break down the issues their company has faced over the past two years in working with vetted sources, not backing down in the face of adversity, and most importantly, forging better relationships with customers. One thing they’ve learned is how to be creative in finding parts while maintaining their reputation with customers. Just because you find it cheaper online doesn’t make it valid. Chris and Joe explain.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

“You are the average of the five people that you spend the most time with.” This saying is attributed to Jim Rohn, and I couldn’t help thinking of that quote as I put together this week’s listings. Hear me out: 1) There are five items on our list; 2) These items zoomed to the top based on reader interest; 3) Every single one of these news items has an “association” association—IPC, iNEMI, SMTA, and NextFlex are all represented in what you, dear reader, chose to explore this last week.

Altium’s EDDI Report Tracks Components’ Availability—Today and Historically

There’s one lesson that all designers have learned over the past few years: Components might be here today and gone tomorrow, so tracking your parts is more important than ever. Any resources that help you keep tabs on your required parts are invaluable in these days of 40-week lead times. Earlier this year, Altium released one such resource: the Electronic Design to Delivery Index (EDDI) report. Assembled from millions of bytes of data gleaned from the Octopart search engineer and the Nexar platform, the monthly EDDI report provides part availability histories going back years, as well as a real-time snapshot of global inventories.

Passing the Test With SMTA’s Rob Boguski

I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

It feels like the first day of school. It’s September, and we’re all officially back at our desks, workstations, or kitchen tables. Even Les Vacances is over. Oui, c’est vrai! But instead of facing new teachers, we have to deal with diverse market forces, supply chain issues, and technology that never seems to stop evolving. Of course, that’s what makes this industry so interesting, isn’t it?

The Critical Balance of Supply and Inventory Control

Can you still design a product and expect to see validation by the next week? The Epoch International Enterprises team of Meghan Zou, Foad Ghalili, Lillian Lin, and Crystal Zhang provide insight into what their distributors have up against over the past two years as they seek to source and validate parts. Often, it means finding alternatives, redesigning the project, and worst of all, sitting and waiting.

Register Now for Happy Holden's ICT Smart Factory Webinar

Happy Holden understands—getting started can be the hardest part. For the past 55 years, he has followed his passion for automation and computers by writing books and white papers, and engineering and managing projects. Each one has always meant one thing: finding the right place to start. The first in a series of eight online sessions starts this Wednesday. Happy will introduce the topic of “Automation and the Journey to Your Smart Factory,” by breaking down the elements this type of journey requires, addressing the five W’s, and encouraging study on your own. Each session, hosted by ICT, is approximately 60 minutes, and is offered at 4 p.m. BST (3 p.m. GMT, 11 a.m. EDT, 8 a.m. PDT) Wednesdays, Sept. 7 to Oct. 26.

Catching Up With ExcelTech’s Matt Redhead

This is a story of hope for the future of our industry. Matt Redhead is a young entrepreneur who started his career in customer service and sales, but always had his sights set on owning a business. Recently, he achieved his dream by becoming the fourth owner of a 46-year-old contract manufacturing business just outside of Portland, Oregon. For those of you who worry about the younger folks joining our ranks, this interview will renew your faith.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week we have quite a variety of articles for you. There has been so much electronics industry news coming out of Washington, D.C., that it can be hard to keep track of what’s going on. So, Editor Michelle Te compiled a handy-dandy reference guide to recent legislation news, including our exclusive coverage. We need to keep an eye on these senators and representatives. They’ve been talking about the importance of our industry for the past year, but this is an election year, after all. They’ve been known to say one thing and do another.

I-Connect007 eBook Introduction: The Evolving NPI Process

Thanks to marketing and advances in technology, we have all come to expect that the electronic products we buy will be closely aligned to our individual and specific lifestyle or business requirements. This expected variability, in personal function and style, as well as regulatory compliance and a changing global economic landscape, has made designing and producing new products a challenging prospect. And, on top of the resulting “high-mix, low-volume” production cycles, increasingly more products contain electronic components in varying levels that heighten the complexity of design and manufacturing.

Thriving Through Greater EMS Collaboration

Events of the past two years have clearly demonstrated the value of strong trading relationships. When materials become constrained, as in the recent microchip shortage or any of the pandemic-driven supply chain snafus, the companies that have those materials have a choice to make. Which customers will be put at the front of the line, and which will be placed at the rear? Too often, company executives assume that since they are a large buyer, they automatically will be prioritized when supplies are constrained. Research has shown that this is not always the case, and that assumption can leave a company in a weakened position.

A Framework for Managing Supply Chain Disruption

Recently, the 200-plus companies that use our software to power their digital supply chain processes have been, half-jokingly, pondering the same line during period customer success meetings: “If only CalcuQuote could create parts out of thin air.” It was asked often enough that we made it into our April Fool’s Joke of 2022.

What’s Going On in Congress? Your Handy Guide to PCB Legislation Headlines

We know you have so many questions about what the legislation means for you. Will there be funds to expand or upgrade my facilities? What about tax breaks? How will my specific needs be known? What will the current legislation mean for U.S. vs. China relations? Use this handy guide to get caught up, sort out the CHIPS from the USICAs, and be that someone who talks knowledgably at dinner parties.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Can it be Friday already? Seems like I’ve just barely put away my Tuesday dishes. Some weeks, I wonder where my days went as they fly by so fast I hardly even realize it. As I looked back through the news for the week, it was clear why everything went so fast: There was a lot going on. The news this week had a nice feel to it. It seems like the industry is starting to gain some traction again with shows, mergers and acquisitions, and companies getting to do those “extras” that they wanted to do before the pandemic reared its ugly head. It had a little of that “back to normal” feel, even if we aren’t quite there yet. What do you think? Are we normal yet?

The CMMC 2.0 Countdown: Will You Be Ready When the Clock Hits Zero?

If you influence IT decisions at your workplace, you need to hear this. If you make the decisions, you need to listen, not just hear: Unless you start acting on CMMC compliance now, you are putting yourself at a disadvantage—one that will take much more time to correct than you might expect. Think of me as a spokesperson for the industry I represent: we are concerned about you. From what I’ve heard and seen over the last few months, too many of you are listening to suppliers, upstream and downstream partners, or other business owners on how seriously to take CMMC. As a result, far too much wishful thinking is guiding decision-making. So, listen to the experts.

Digi-Key Drilling Down on Counterfeit Parts

The I-Connect007 Editorial Team spoke with Digi-Key senior managers Levy Olson (product management) and Kelsey Lawrence (operational excellence) about parts availability and how to manage the challenges of the ongoing shortages in supply. Levy and Kelsey share some intriguing statistics on counterfeit parts and discuss how Digi-Key ensures their extensive inventory is stocked with authentic parts.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

There was some good news this week, as Republicans and Democrats managed to cooperate long enough to pass the CHIPS Act. Members of the House and Senate don’t usually act until they get worried about being voted out of office, so pardon me if I’m not ready to sing “Happy Days Are Here Again” just yet. But this is still really good news; the politicians are on the record now, and we can hold them accountable.

Business Email Compromise: The $43 Billion Scam

Business email compromise/email account compromise (BEC/EAC) is a sophisticated scam that targets both businesses and individuals who perform legitimate transfer-of-funds requests. The scam is frequently carried out when an individual compromises legitimate business or personal email accounts through social engineering or computer intrusion to conduct unauthorized transfers of funds. The scam is not always associated with a transfer-of-funds request. One variation involves compromising legitimate business email accounts and requesting employees’ Personally Identifiable Information, Wage and Tax Statement (W-2) forms, or even crypto currency wallets.

Printed Circuit Boards: Past the Lobby and Onto the Floor

There has not been a time in recent memory when the U.S. legislative body is putting as much focus on the microelectronics industries. One bill, the CHIPS Act, was signed into law last year. A new bill introduced this year seeks to allocate funding for printed circuit board fabrication. In this exclusive interview, our team spoke with Travis Kelly, CEO of Isola Group and president of the Printed Circuit Board Association, and U.S. Rep. Blake Moore (R-Utah), who has co-sponsored the bill now before the House. Travis and Blake both express optimism about onshoring domestic production, but the realities of the legislative calendar may pose some risks.

IPC's I-Connect007 Acquisition Update With John Mitchell

Editor Nolan Johnson speaks with I-Connect007 Publisher Barry Matties and IPC President and CEO John Mitchell about IPC's acquisition of the publishing company, and what this means to I-Connect007's readers.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.

Q4 Concerns: Hold on to Your Hats

IPC Chief Economist Shawn DuBravac has plenty to share about the state of the U.S. economy and how the electronics manufacturing industry might weather the storms of high inflation, rising interest rates, and low unemployment. It’s an interesting situation to find ourselves in as the flurry of opinion on a 2023 recession starts to take shape. Does it make sense to invest in PCB fab now? And how does the rest of the world feel about it? Shawn gets to the bottom line.

New Book from I-Connect007 Examines Evolution of Electronics Industry NPI

The Electronics Industry’s Guide to… The Evolving PCB NPI Process is the first book in I-Connect007’s new The Electronics Industry’s Guide to… technical series. This valuable resource is for all segments of the electronics interconnect industry.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Our biggest news this week: I-Connect007 has been acquired by IPC. Every member of the team, including founder and Publisher Barry Matties, is included in this deal. We’ve enjoyed working closely with IPC for decades, especially at events like IPC APEX EXPO, and we have four IPC columnists writing in our magazines and newsletters. This move makes sense for both parties. It enables us to take our magazine, newsletters, and book publishing to the next level, and IPC won’t have to spend years building a media company from the ground up. It really is a win-win.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in